Weld-on jack has a retracted height of 24-1/4" and an extended height of 39-1/2". Square design provides superior side-load support. Offers 15-1/4" of screw travel and 13-3/4" of ... : 7,000 lbs Support capacity: 8,000lbs Outer tube width: 2-1/4" Inner tube width: 2" Footplate dimensions: 7-7/8" long x 5-7/8" wide Handle radius: 9-3/4" Adjustment hole spacing
Weld-on jack has a retracted height of 25-1/8" and an extended height of 40-1/4". Square design provides superior side-load support. Offers 15-1/8" of screw travel and 13-3/4" of ... (from bottom of foot to top of jack): 25-1/8" Retracted 40-1/4" Extended Total lift: 28-7/8" Screw travel: 15-1/8" Drop leg travel: 13-3/4" Lift capacity: 7,000 lbs Support
This heavy-duty, square, drop-leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 25-11/16" ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
Weld-on jack has a retracted height of 24-3/4" and an extended height of 40-1/8". Square design provides superior side-load support. The drop leg offers 13-1/2" of lift on top of the ... foot to top of jack): 24-3/4" Retracted 40-1/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8" Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000lbs
Weld-on, pipe-mount swivel jack pivots up for travel, down for use. Square design provides side-load support. Retracted height is 14-1/2". Extended height is 29-1/2". Drop leg offers ... Support capacity: 8,000lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8" long x 6" wide Pipe mount diameter: Inner: 2" Outer: 2-1/2" Handle radius
Drop leg jack with integrated footplate welds directly onto your application, has 22-7/8" retracted height and offers superior side-load strength for your agricultural or industrial needs ... : 8,000lbs Limited 3-year warranty
Heavy-duty single-speed jack lifts up to 5 tons. Pull the front-facing pin to release up to 13" of drop leg. Perfect for agricultural, construction, livestock or heavy-duty utility applications ... combined lift capacity of no less than 12,500 lbs. If you only have one jack that can get the job done, that's great! In fact, this should work more efficiently, allowing you to spend less time cranking
Included weld-on pipe mount lets you pivot jack up for travel and down for use. Retracted height is 14-1/2". Extended height is 29-7/8". Drop leg offers 13-1/2" of lift on top of ... pipe mount): 14-1/2" Retracted 29-7/8" Extended Total lift: 28-7/8" Screw travel: 15-3/8 Drop leg travel: 13-1/2" Lift capacity: 7,000 lbs Support capacity: 8,000lbs Outer tube width
Drop leg jack with integrated footplate welds directly onto your application, has 25-1/8" retracted height and offers superior side-load strength for your agricultural or industrial needs ... : 8,000lbs Handle radius: 7-1/8" Footplate dimensions: 8" long x 6" wide Limited 1-year warranty
This compact, user-friendly scissor jack is a must-have to keep your RV level and stable on every journey. It adjusts from 5" to 29". Bow-tie base steadies the jack on soft surfaces.: 24" Support capacity: 7,500 lbs Quantity: 1 jack Limited lifetime warranty
With 48" of lift, this 54" tall farm jack is great for lifting, pulling, clamping, and spreading. Sturdy steel jack has a 36" long removable handle and a corrosion-resistant finish ... ; Weight capacity: 8,000lbs
Designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank can be switched out for a motor (LC142178 - sold separately). Retracted height ... height: Retracted: 32-3/4" Extended: 53-1/4" Total lift: 36-1/2" Screw travel: 20-1/2" Drop leg travel: 16" Outer tube length: 29-1/2" Combined weight capacity: 8,000lbs Gear
Specially designed to level and stabilize your trailer or RV, each of these jacks provide simple, effective leveling. Manual crank (RVLG-HDL) and motor (LC142178) sold separately. Retracted height is ... ; Combined weight capacity: 8,000lbs Gear ratio 3:1 Distance between legs: 44-1/2" When positioned as close together as possible 72" When positioned as far apart as possible Footplate dimensions
... weight capacity of set is 8,000lbs. capacity: 8,000lbs Cross shaft length: 41" - 71" Overall dimensions: 32-3/4" tall x 2-1/2" wide Distance between weldstops: Inside to inside: 15-1/2" Outside to outside: 17-1/2"
Support your 5th-wheel trailer or RV with this landing gear set. Oversize, self-leveling footpads provide superior stability. Screw travel is 18". Get an additional 18" of travel with the drop legs. Crank sold separately.; Extended Total lift: 36" Screw travel: 18" Drop leg travel: 18" Combined weight capacity: 8,000lbs Outer tube width: 2-1/2" Inner tube width: 2-1/4" Footplate dimensions: 8"
This heavy-duty, square, drop-leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 18-3/16" ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
This heavy-duty, square, drop leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 22-7/8" ... Features: Superior side-load capacity compared with round jacks Outer and inner tubes overlap for additional strength when jack is fully extended Square design provides additional support for side
Quickly and easily raise, level and support your fifth-wheel trailer or RV with this powerful pair of jacks. Electric motor operates independently for precise leveling and is capable of 9" of ... : 9" Housing measures: 2-1/2" x 2-1/2" Combined support capacity: 8,000lbs Combined lift capacity: 8,000lbs Measurement from inside of top weld stop to inside of bottom weld stop
Replaces the gears and roll pins on your etrailer or Ram square, direct-weld, sidewind jack with a 5,000-lb or 7,000-lb capacity. Designed for TJD-5000S and TJD-7000S Series jacks.Features: Replacement gears and roll pins work with etrailer and Ram square, direct-weld, sidewind jacks that have a 5,000-lb or 7,000-lb capacity Designed for use with Ram TJD-5000S and TJD-7000S
Replaces 1 hydraulic jack assembly for Lippert Components Level Up RV leveling system. Black aluminum construction. trailers it works as a middle or rear jack Specs: Height: 19-7/16" retracted Footpad diameter: 9" Weight capacity: 8,000lbs
Replaces 1 hydraulic jack assembly for Lippert Components Level Up RV leveling system. Constructed of silver aluminum. Retracted height is 21-1/16" with a 9" diameter footpad. holes for ease of installation Specs: Height: 21-1/16" retracted Footpad diameter: 9" Travel: 15" Weight capacity: 8,000lbs
Replaces the bearing, nut, and washer for your Bulldog trailer jacks with 7,000-lb to 8,000-lb static capacity.Features: Replaces the bearing, nut, and washer for your Bulldog trailer jacks with 7,000-lb to 8,000-lb static capacity Also fits Crown jacks with 7,000-lb capacity Includes: 1 bearing, 1 nut, and 1
Replaces the pull pin for your Bulldog 8,000-lb sidewind, pipe-mount swivel jack (BD190756 or BD190758) or Crown jack with 7,000-lb capacity. Chain secures to side of the jack so you don't lose ... Features: Replaces the pull pin for your Bulldog 8,000-lb sidewind, pipe-mount swivel jack (BD190756 or BD190758) or Crown jack with 7,000-lb capacity Chain secures to side of the jack so you
Drop-leg jack with heavy-duty footplate base and swivel mount offers superior side-load strength in a compact package. Jack has 12-3/4" retracted height and measure 12-7/16" from mounting ... radius: 8-1/2" Lift capacity: 5,000 lbs Static capacity: 8,000lbs Limited 5-year warranty
Filters
