1. Trailer Jack
  2. Bulldog
  3. Side Frame Mount Jack
  4. 7200 lbs
  5. Topwind Jack
  6. Drop Leg
Bulldog Square Jack w/ Footplate - Drop Leg - Topwind - 28-1/2" Lift - 7,200 lbs

Bulldog Square Jack w/ Footplate - Drop Leg - Topwind - 28-1/2" Lift - 7,200 lbs

Item # BD180354
lowest price pledge
Retail:$200.23
Our Price: $142.26
You Save: $57.97
Trailer Jack
This item qualifies for Free Shipping
Shipping Weight: 30 lbs
Quantity: 
In Stock
Bulldog Topwind Jack Trailer Jack - BD180354
zoom in icon
slider vertical icon
zoom out icon
Comment field cannot be left empty.
Name field cannot be left empty.

Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.

Error submitting comment. Please try again momentarily.

Product Images

Customer Photos

Videos

This heavy-duty, square, drop leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 22-7/8" retracted height. Lowest Prices for the best trailer jack from Bulldog. Bulldog Square Jack w/ Footplate - Drop Leg - Topwind - 28-1/2" Lift - 7,200 lbs part number BD180354 can be ordered online at etrailer.com or call 800-298-1624 for expert service.
  • All Info
  • Reviews (15)
  • Q & A (12)
  • Photos
  • Why etrailer?

Bulldog Trailer Jack - BD180354

  • Side Frame Mount Jack
  • 7200 lbs
  • Topwind Jack
  • Drop Leg
  • Weld-On
  • Fixed Mount Jack
  • 29 Inch Lift
  • With Foot
  • Bulldog

This heavy-duty, square, drop leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 22-7/8" retracted height.


Features:

  • Superior side-load capacity compared with round jacks
    • Outer and inner tubes overlap for additional strength when jack is fully extended
    • Square design provides additional support for side loading
  • Durable, heavy-gauge construction lets you mount without burn through
  • Weather-resistant coating on outer tube and zinc inner tube
  • Screw-nut stop prevents damage to screw and/or nut when jack is fully extended
  • Topwind handle has smooth, ergonomic design for easy cranking
    • Includes bushing in top cap and "eagle claw" grip
  • Drop leg increases overall extension for maximum adjustability
  • Heavy-duty footplate has reinforcement ribs for increased strength and zero water retention
  • Long bearing and gear life with oil-impregnated bushing
  • Direct-weld design
  • ASABE compliant


Specs:

  • Bracket height:
    • 22-7/8" Retracted
    • 51-3/8" Extended
  • Total lift: 28-1/2"
    • Travel: 15"
    • Drop leg: 13-1/2"
  • Tubing width: 3"
  • Handle radius: 12"
  • Lift capacity: 7,200 lbs
  • Static capacity: 10,000 lbs
  • Limited 5-year warranty


180354 Bulldog Square Direct Weld Jack with Drop Leg, Topwind, 28-1/2" Lift - 7,200 lbs - TWL 180 DL-BQ

Installation Details BD180354 Installation instructions


California residents: click here



Customer Reviews

Bulldog Square Jack w/ Footplate - Drop Leg - Topwind - 28-1/2" Lift - 7,200 lbs - BD180354

Average Customer Rating:  4.5 out of 5 stars   (15 Customer Reviews)

This heavy-duty, square, drop leg jack is smaller than typical large-capacity jacks - perfect for tight-fitting applications. Welds directly onto trailer with no burn through and has 22-7/8" retracted height.

- BD180354
by:

I wanted something that would be strong and hold up over time. This Jack is used to support my stainless steel 6 hole dog trailer with my side X side loaded on the back. So it’s not light. I tend to do things by overkill but with this bulldog Jack it perfect for the job! Did some fabrication on making the mounting plates and fitting it in just right. A little taping it off and painting to match the trailer. I would highly recommend using this Jack and using Etrailer for all your needs!



- BD180354
by:

Works great unloaded. With any load it bogs down. A side wind might work better, as the longer radius of the top wind seemingly requires more effort.


Comments
Thank you for your review. One of our experts have tested the Bulldog jack requires 5 cranks to move the jack 1 without a load. Please keep in mind this jack is also rated for 7200 lbs lift capacity so be sure to not exceed that weight rating. It may also be easier to use a side wind jack like you mentioned because you are moving the crank up and down instead of side to side.
-- Etrailer Expert Heather A - 05/19/2021


- BD180354
by:

Awesome jack, perfect for my trailer



- BD180354
by:

It seems odd that it came with no instructions and there are no installation instructions on either the etrailer site or on the BullDog (Cequent) site. I have not had it welded on yet, but figured it will be less risky to weld it with it disassembled so that is what I have done. I got the top wind unit this time because my last one was a Fulton with a side wind and the bevel gear broke and is no longer available, necessitating its replacement. I figure a top wind has one less thing to go wrong.


Comments
Works fine. As I mentioned, I disassembled it before welding it on.
Sherman - 09/21/2016



- BD180354
by:

All the products I have bought through etrailer have been awesome but above that their service is what sells me! Thanks for the great service and products!



- BD180354
by:

Great product... It the Bulldog quality we always expect... Awesome..



- BD180354
by:

Strong jack, heavy. Real easy to weld


Comments
This Jack is a monster. My trailer is very heavy, specially in the front. This jacks lifts the trailer with very little effort.
Mike - 08/21/2016



- BD180354
by:

Only thing I would change on this jack would be to shorten the the handle a bit.



- BD180354
by:

It works as expected



- BD180354
by:



- BD180354
by:

IT WORKS GREAT



- BD180304
by:

Review from a similar TW Heavy Duty Square Direct Jack in Trailer Jack


Have made multiple orders, fast turnaround. Free shipping. Will continue to make purchases.



- BD180304
by:

Review from a similar TW Heavy Duty Square Direct Jack in Trailer Jack


Jacks are strong and it is exactly what I need for my equipment



- BD180304
by:

Review from a similar TW Heavy Duty Square Direct Jack in Trailer Jack




- BD195319
by:

Review from a similar TW Heavy Duty Square Direct Jack in Trailer Jack



15
15

Ask the Experts about this Bulldog Trailer Jack

  • Welding Instructions for Bulldog Square Jack BD180354
    Direct weld-on installing Bulldog Square Jack # BD180354 requires two 1-inch-long 3/16 fillet welds on each side of the outer tube. The instructions do not limit what part of the outer tube can be welded. If you choose to use a pivot tube the non-beveled side of the pivot tube is welded to the tongue using a 3/16 fillet weld all around the tube. The written instructions are linked for you and these detail the various installation options as well as recommended maintenance.
    view full answer...
  • Availability of Powered Side Frame Mount Jack for Trailer
    There isn't a way to motorize the Bulldog Square Jack w/ Footplate # BD180354 so the closest option we have that you might be interested in is the Fulton XLT Powered Drive Trailer Jack # F141401 which is a similar style of side mount jack that has a motor built into it. It has a 2,500 lb capacity and is designed to attach to the side of trailer frames. I attached a review video for this jack for you to check out as well.
    view full answer...
  • Replacement Jack Recommendation for a Bulldog 180461
    The picture of the jack that you sent in would be basically the exact same thing as the Bulldog Square Jack # BD180354 that you referenced. If you are looking to replace your jack this would be a perfect replacement. I attached a review video for you to check out as well.
    view full answer...
    Image 1 for
  • Replacement Jack Recommendation for Replacing Shelby 6108SW
    The closest jacks to the 8K Shelby 6108SW that we offer at this time are our Square Direct Weld Jack with Footplate, part # TJD-7000, and the 7.2K-rated Bulldog Square Jack # BD180354. For an 8K square side-wind jack we have Pro Series # PS1400860383.
    view full answer...
  • Replacement Handle for a 7,200 Pound Bulldog Square Jack
    If you have the Bulldog sidewind trailer jack # BD180455, then you can replace the sidewind assembly with part # BD800144. It will include the handle, gear and bushing kit. For the Bulldog square top wind jack # BD180354 or # BD180304, the replacement topwind handle is # BD500344. It will include the crank, bolt and nut. I included a couple video reviews for you as well.
    view full answer...
  • Threads on Bulldog Square Jack # BD180354 are Stripped Out
    If the inside of the handle stripped out then the replacement part is # BD500344. Otherwise if it's the stud on the jack then you will need to purchase a new jack with part # BD180354. My contact at Bulldog confirmed this.
    view full answer...
  • Dimensions of Inner Tube on Bulldog Square Jack # BD180354
    I went out to our warehouse and measured the inner tube (not the drop leg) on the Bulldog Square Jack # BD180354 to be right at 2-1/2 inches x 2-1/2 inches. The outer leg of the jack measures 3 inches x 3 inches like you mentioned. I have attached an image to assist.
    view full answer...
    Image 1 for
  • Thickness of Outer Tube Material on Bulldog Square Jack BD180354
    The square outer tubing on the Bulldog Square Jack # BD180354 measures 3-inches on a side. It is heavy enough material that it can be welded directly onto the trailer frame with no burn through. The outer tube is made of 1/8-inch thick steel. I went to our warehouse to measure it for you to be sure. Each jack has a lifting capacity of 7200-lbs. This means that for your application of stabilizing a trailer during the loading of heavy equipment these will work fine. Since you are not asking...
    view full answer...
  • How Many Cranks Does the Bulldog Square Jack part # BD180354 take to Move an Inch
    I went out into our warehouse and grabbed a Bulldog Square Jack part # BD180354 and determined that it took 5 cranks for the jack to move an inch. I attached a review video for you to check out as well.
    view full answer...
  • Is the Bulldog Jack part # BD180354 RoHS Compliant
    I can assure you there are no restricted hazardous chemicals used in any of the finishes of the Bulldog jack like the part # BD180354. I spoke to my contact at Bulldog and he informed me that there is no hexavalent chromium or anything else that would prevent it from being RoHS compliant.
    view full answer...
  • Could Top Handle of Bulldog Trailer Jack BD180354 be Turned with 18 Volt Impact Wrench
    I am confident an 18 volt impact wrench would easily turn the top handle of the # BD180354 but as far as what size socket it might need I am not really sure on that.
    view full answer...
  • Can a 10K Bulldog Drop Leg Trailer Jack be Trimmed to be Shorter
    The issue is that there is a screw inside the jack that turns in either direct to raise or lower the jack. It threads through a fixed nut. At the very top of the screw the threads are all mashed up so that the leg can't just fall out. Basically there isn't a way to take the legs out without having to cut open the jack and then it is pretty much useless because it will have lost its capacity. Could you go with a 7,200 pound jack? Drop leg jack # BD180354 is rated for 7,200 pounds at will...
    view full answer...

Do you have a question about this Trailer Jack?




  • Why etrailer.com?

    At etrailer.com we guarantee:
  • Highest quality trailer jack for the best price.

    Our Lowest Price Pledge ensures you will never overpay for the parts you need.
  • Real product know-how.

    We make sure that the products we sell are what we say they are, and that they work the way they are supposed to work. Get real advice from a real person who has the knowledge and expertise needed to solve your problem.
  • Most detailed, accurate trailer jack information available.

    Because we take providing accurate product information seriously, we take our own detailed product photos, demo videos and installation videos, as well as verify measurements, instructions, and vehicle fit information.
  • Installations, made easy.

    We love helping people and have the most highly-trained customer service, hands-on experience, step by step videos and installation instructions.
  • Fast shipping.

    Your order is automatically routed to get out of our warehouse and to your door as quickly as possible. Receive free shipping on orders over $99.
  • Personalized service for life.

    We provide one-on-one, personalized service from the ordering process through the life of your product.
  • Trusted since 1946.

    We've been serving customers since our parts store first opened in 1946 and continue to be recognized by our customers, our vendors and third parties for exceptional service.
  • Returns Policy

    Need to return an item? No problem. Please read our Returns Policy for more information.

Info for this part was:

Employee Lindsey S
Written by:
Lindsey S
Employee Patrick B
Installed by:
Patrick B
Employee Jameson C
Expert Research:
Jameson C
Employee Adam R
Expert Research:
Adam R
Employee Adele M
Updated by:
Adele M
Employee Laura H
Updated by:
Laura H
Employee Wilson B
Updated by:
Wilson B
Employee Alexander C
Updated by:
Alexander C
Employee Isabelle B
Updated by:
Isabelle B

At etrailer.com we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.