Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Hey Luke! What kind of trailer do you have? Yes, the Furrion Vision S+ Wireless RV Backup System #FR57AD will fit where the old Vision S was. They use the same mounting bracket and wiring so it should be an easy swap. The only thing that isn't…
view full answer...Hey Tom! I am sorry but the Under-Bed Rail and Installation Kit item #RP30126 only fits up to the 2016 model years and no one makes a comparable after market puck system for the 2024 F-350's. For an autoslider set up you will have to add a set of…
view full answer...You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…
view full answer...Generally speaking, the lube plate will need to cover the skid plate on the 5th wheel hitch. There are some pin boxes out there that will recommend a specific lube plate but most of the times this classification will be from the 5th wheel hitch…
view full answer...Hey Robert, I have a front hitch solution that will work for your 2024 Ford F-250 with the Draw Tite hitch part #65076 but the EcoHitch you referenced does not fit the diesel models so it would not work with you. What will you put in the front…
view full answer...Hi there Ron, it looks like as long as your 2024 Ford F-350 does not have dual rear wheels the EcoHitch Hidden Front Mount Trailer Hitch Receiver #EH39CR will fit. If you do have dual rear wheels, then you'd need to use the EcoHitch Hidden Front…
view full answer...Hey Geroge, The advantage of the EcoHitch #EH39CR over the Draw-Tite #65076 for your 2025 Ford F-350 Super Duty is that the receiver sits up higher so you get better clearance for your accessory and you don't lose any ground clearance. The…
view full answer...Hey David, I checked out pictures of a 2025 Eagle SLE 24MLE online and it looks like it has an extended pin box and a tapered nose so you would be able to get away with a fixed hitch and still have great turning clearance with it and your 2024 Chevy…
view full answer...Hey Wade! Your picture didn't come through so I wasn't able to see what axles you have on your 2019 Keystone Alpine 3700FL. Do your axle tags say they're 7,000 lbs? If so, you can use the DeeMaxx Disc Brake Kit w/ Actuator for Tandem Axle…
view full answer...The recommendation for the 10" diameter lube plate on a B&W Companion 5th Wheel Trailer has come from the manufacturer of the fifth wheel hitch, B&W. The Lube Plate for Reese 5th Wheel Trailer Hitches part #RP83002 will work just fine…
view full answer...Curt recommends the use of 250 ft/lbs of torque when tightening the nuts of their hitch balls with a 1 inch diameter shank like the part #C40034 that you referenced. The general rule is for a 3/4" shank tighten to 150 ft/lbs For a 1" shank…
view full answer...If one of your trailer slide's gearpack needs replacement due to damaged/missing gear teeth I do recommended replacing both. There is a chance that the alignment issue from the missing teeth on the one gearpack could have damaged or at least…
view full answer...Filters
6150 results
Vehicle Fit
Fit 2005 Infiniti G35