This Lippert double-lip grease seal matches the following common seal numbers: Brand Part Number Chicago Rawhide/SKF CR 22532, CR 22550 Dexter 10-36, 010-036-00 Lippert 2023134655 National/Timken 412920, 472920, 452920, 482920 TruRyde GS-2250DL Transcom 22333TBN, 22333TB How to Measure for a Replacement Seal Use a digital caliper and measure to the nearest thousandth of an inch.
Oil leaked, water got in, and the bearings are shot on your 7,000-lb #42 spindle. Not every hub will fit on that setup. This galvanized idler hub is built to replace threaded Dexter Vortex oil bath hubs, restoring function without changing the axle.Races Included: Inner race 25520 and outer race 14276 come installed for bearing swaps. Know What's Separate: Bearings 25580 and 14125A, seal GS-2250DL, cap, lug nuts sold separately. Features to know about Threaded Replacement for Dexter Vortex Hubs A failed oil bath hub leaves you with a spindle that standard hubs will not fit.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: Dexter Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 5/8" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Stainless steel calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 5/8" Wheel bolts (16) 5/8" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Provides maximum rust protection - great for saltwater boat trailers Maxx coating provides superior corrosion resistance for freshwater or saltwater use with over a 1,000-hour salt spray rating Floating design of calipers ensure smooth braking with limited wear and potential leaks Ceramic brake pads provide superior performance for more consistent braking Withstand high temperatures for maximum wear Slotted design minimizes brake squeal for a quiet ride Requires minimal maintenance, saving you time and money 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes for 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, E-Z Lube caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: ALKO Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 5/8" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 5/8" Wheel bolts (16) 5/8" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
It sure is Barry! The SoftStartRV Soft Start item #SSR54FR is exactly what you need for a Furrion AC unit. It'll lower the amps required during startup so you can run other appliances at the same time or power your Grand Design off of a…
Hi Tom, We have two axles rated for 3.5K that have an 85" hub face measurement, but they have different spring seat measurements. The Lippert Beam Only Trailer Axle part #LC93PK has a 70" spring center to spring center measurement and fits…
Hi Debbie, thanks for reaching out. You are on the right track looking for a 12" drop adapter. For the amount of drop you need, the best heavy-duty option we have is the Gen-Y Adjustable 2-Ball Mount with 12" drop, part #325-GH-625. It uses…
Hey Scott, for a Curt 7k axle the replacement grease seal would be the part #GS-2250DL which has an outer diameter of 3.38 inches which I think you might have dropped off a number in the number you listed. This is close enough to the number Lippert…
To replace a spindle, the old one would need to be cut off, and the new one welded into place. This is NOT a job for the do-it-yourselfer. The new spindle must be absolutely square with the axle in order to prevent premature tire wear and wheel…
We have exactly what you are looking for. I reached out to my contact at Lippert and based on the information on the axle tag you provided your 8000lb axle uses the following replacement parts: Inner bearing: #25580 Inner race: #25520 Outer bearing:…
The Coach Air Kit for Air Force One Supplemental Braking System part #SM99627 includes the motor home installation components that come with the full kit Air Force One system part #SM99243. Keep in mind the coach air kit is only half the kit of a…
Hey Ron! Sorry to hear that happened. Have you asked them to replace it? The Mighty Cord Replacement RV Power Inlet #A10-30INBKVP door isn't available separately but it can be replaced. You can remove the four screws from the cover which will…
We have several 5,000 lb Bulldog trailer jacks but I was not able to find your exact part number. If you check out the link I attached you can see all of the 5k Bulldog jacks we carry. The closest matching part number we have is the part #BD155032…
The compatible 2K 'off the shelf' axles we carry would have a 60 or a 72 inch hub face dimension or a 48 or 58 spring center dimension. You'll need a custom axle, which we don't carry. If you'd care to reply and provide your city,…
Is this occurring with the trailer plugged in or was it unplugged? If it's happening with the trailer plugged in, the likely cause is a short in the trailer wiring. You'll want to examine the running light circuit, which is usually a brown…
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on hub-rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: Dexter Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 9/16" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 9/16" Wheel bolts (16) 9/16" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Provides maximum rust protection - great for saltwater boat trailers Maxx coating provides superior corrosion resistance for freshwater or saltwater use with over a 1,000-hour salt spray rating Floating design of calipers ensure smooth braking with limited wear and potential leaks Ceramic brake pads provide superior performance for more consistent braking Withstand high temperatures for maximum wear Slotted design minimizes brake squeal for a quiet ride Requires minimal maintenance, saving you time and money 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes for 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, E-Z Lube caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: ALKO Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 9/16" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 9/16" Wheel bolts (16) 9/16" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on hub-rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes everything you need to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: Dexter Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 5/8" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 5/8" Wheel bolts (16) 5/8" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: ALKO Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 5/8" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 stainless steel calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 5/8" Wheel bolts (16) 5/8" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: ALKO Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 9/16" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Stainless steel calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 9/16" Wheel bolts (16) 9/16" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Ideal for saltwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 8,000 lbs #42 Spindle Axle type: Dexter Wheel size: 16" and larger Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Brake flange configuration: 4 bolt Wheel bolt diameter: 9/16" 7-Year warranty Bearing, Race, and Seal Information Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Grease cap outer diameter: 2.875" Complete Kit Contents 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Stainless steel calipers 2 Maxx coat mounting brackets 4 Stainless steel caliper mounting bolts 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 E-Z Lube grease caps (16) 9/16" Wheel bolts (16) 9/16" Stainless steel lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Maxx coating is even better than Dacromet, making this kit perfect for your boat trailer. Includes inner (25580) and outer (02475) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on hub-rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 9/16" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Complete Kit Contents: 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 Zinc-coated grease caps (16) 9/16" Wheel bolts (16) 9/16" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Durable Maxx coating and stainless parts make this kit perfect for occasional salt exposure. Includes inner (25580) and outer (02475) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 9/16" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Complete Kit Contents: 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Stainless steel calipers 2 Maxx coat mounting brackets 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 Zinc-coated grease caps (16) 9/16" Wheel bolts (16) 9/16" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Durable Maxx coating and stainless parts make this kit perfect for occasional salt exposure. Includes inner (25580) and outer (02475) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Excellent for occasional use in saltwater or areas with a lot of snow, slush, and road salt Corrosion-resistant Maxx coat finish on hub-rotors and brackets has a salt spray rating over 1,000 hours Stainless steel calipers are rustproof Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 5/8" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Complete Kit Contents: 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Zinc-coated calipers 2 Maxx coat mounting brackets 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 Zinc-coated grease caps (16) 5/8" Wheel bolts (16) 5/8" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Replace your hubs with these rust-resistant hub-rotor assemblies to get safer, more consistent braking. Maxx coating is even better than Dacromet, making this kit perfect for your boat trailer. Includes inner (25580) and outer (02475) bearings.Features: Lets you upgrade your trailer from drum to disc brakes for superior performance Great for towing and launching your boat in fresh or brackish water Corrosion-resistant Maxx coat finish on hub-rotors, calipers, and brackets has a salt spray rating over 1,000 hours Drainage holes in the hat section allow water to drain easily, further minimizing corrosion Offers dramatically shorter stopping distances and smooth, controlled braking Ceramic brake pads increase stopping power Stainless steel piston provides fast, responsive braking Requires minimal maintenance, saving you time and money Laser-etched instructions on caliper take the guesswork out of installing and bleeding the brakes 1-Piece hub-and-rotor assembly reduces the chance of uneven rotor wear Vented design dissipates heat faster to prevent premature brake pad wear High-quality, automotive-grade construction is long-lasting Includes assemblies needed to upgrade brakes on 1 axle 2 Integral hub-rotor assemblies come with bearings, races, grease seals, grease caps, wheel bolts, and lug nuts Hydraulic brake actuator rated at 1,500 psi or above and brake lines (sold separately) are required to activate brakes Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13-1/8" Piston diameter: 2-1/2" Brake flange configuration: 5 bolt Wheel bolt diameter: 5/8" 7-Year warranty Bearing, Race, and Seal Information: Bearings Inner bearing: 25580 Outer bearing: 02475 Races Inner race: 25520 Outer race: 02420 Grease seal: GS-2250DL Complete Kit Contents: 2 Maxx coat, cast iron integral hub-rotor assemblies 2 Maxx coat calipers 2 Maxx coat mounting brackets 2 Inner bearings 2 Outer bearings 2 Inner races 2 Outer races 2 Grease seals 2 Zinc-coated grease caps (16) 5/8" Wheel bolts (16) 5/8" Zinc lug nuts The DeeMaxx Difference When brakes retain heat, they are more likely to experience brake fade, or loss of braking power.
Great for coastal or snowy areas, these Dacromet-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.
Great for coastal or snowy areas, these Dacromet-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 5/8" bolts.
9/16" Wheel bolts are included in this brake kit. Allows you to switch your trailer over to disc brakes for improved performance and greater stopping power. Dacromet-coated brakes are corrosion resistant. Perfect for use with boat trailers.Features: Dacromet-coated brake kit has everything you need to switch your trailer over to disc brakes 6 Disc brake end kits Hub-and-rotor assemblies Grease seals, races, and bearings Calipers with mounting brackets and hardware - attach to 5-bolt brake flanges Hydrastar electric-over-hydraulic brake actuator Hardwires into tow vehicle and signals in-cab brake controller when brakes are applied, triggering pump and motor on actuator Creates smooth, even braking with fast response time Works with most in-cab brake controllers (sold separately) Line kit with brake lines and fittings for triple-axle trailers Disc brakes deliver better performance Consistent stopping even at highway speeds Shorter stopping distance than most drum brakes Trailer coupler not included Specs: Axle capacity: 7,000 lbs Bolt pattern: 8 on 6-1/2" Rotor diameter: 13" Wheel stud diameter: 9/16" Warranty: Actuator: 2 years Brakes and components: 1 year Bearings, Race, and Seal Information: Bearings Inner bearing 25580 Outer bearing: 14125A Races Inner race: 25520 Outer race: 14276 Seal: GS-2250DL Inner diameter: 2.250" Outer diameter: 3.376" Complete Kit Includes: Hydrastar electric-over-hydraulic trailer brake actuator 7K disc brake kit including hub-and-rotor assemblies with bearings, races, and seals Hydraulic triple-axle brake line kit (1) 30' Long brake line - 3/16" (1) 6' Long brake line - 3/16" (6) 4-1/4" Long brake lines - 3/16" (6) 18" Male/male rubber flex lines (3) 3/16" Brass T-fitting (2) 3/16" Brass union fitting (1) 3/16" Brass X-fitting 1/2" Nylon hose clamps 3/16" Nylon hose clamps Self-tapping screws Disc Brakes More and more people are switching their trailers over to disc brakes, and with good reason.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Specs: Application & Capacity Axle rating: 5,200 - 7,000 lbs Spindle compatibility: #42 Wheel size: 16" to 17-1/2" Brake type: compatible with electric brakes Drum size: 12" diameter x 2" wide Weight capacity per hub: 3,500 Quantity: 1 assembly Bolt Pattern Pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: 14125A I.D: 1.250" Bearing: 25580 I.D: 1.75" Grease seal: GS-2250DL I.D: 2.25" O.D: 3.376" Grease cap (drive-in, EZ Lube): DC-275L O.D: 2.72" Grease cap plug: DC-RP Lug nuts: 6-109 Nut retainer: 6-190 or 006-190-00 Spindle jam nut: 6-191 Diameter: 1" Bearing races: included and pre-installed Material Type Hub and drum: iron
Ideal for freshwater boat trailers, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.
Great for coastal or snowy areas, these Dacromet-coated disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (02475) bearings and 9/16" bolts.
Great for your camper, car hauler, or trailer, these disc brakes offer a safe ride. Short stopping distances and consistent braking keep your trailer from pushing and pulling. Includes inner (25580) and outer (14125A) bearings and 1/2" bolts.
Shuddering brakes, trailer sway, or grinding under load? Worn drums and bearings put safety at risk. An ABS-ready hub built for Dexter's Tow Assist restores smooth braking, steady tracking, and the peace of mind to tow without second-guessing.Specs: Application & Capacity Axle rating: 8,000 lbs Spindle compatibility: requires 2.25" I.D. seal Wheel size: 16" to 17-1/2" Brake type: compatible with electric brakes Drum size: 12" diameter x 3-3/8" wide Weight capacity per hub: 4,000 lbs Quantity: 1 assembly Bolt Pattern Pattern: 8 on 6-1/2" Wheel bolt diameter: 5/8" If you need help figuring out your bolt pattern, just scroll down for directions Included Components Bearing: 02475 I.D: 1.250" Bearing: 25580 I.D: 1.75" Grease seal: GS-2250DL I.D: 2.25" O.D: 3.376" Grease cap (drive-in, EZ Lube): DC-275L O.D: 2.72" Grease cap plug: DC-RP Lug nuts: 6-109 Nut retainer: 6-190 or 006-190-00 Spindle jam nut: 6-191 Diameter: 1" Bearing races: included and pre-installed Material Type Hub and drum: iron
Filters
