Thank you! Your comment has been submitted successfully. You should be able to view your question/comment here within a few days.
Error submitting comment. Please try again momentarily.
If your braking feels weak or uneven, this DeeMaxx 13" disc brake kit is a serious upgrade. The one-piece hub-and-rotor assemblies replace worn drum setups and deliver shorter stopping distances with smooth, consistent braking. Ceramic pads and stainless steel pistons give quick, responsive power while cutting down on fade. Each assembly is built for 7,000-lb axles with an 8 on 6-1/2" bolt pattern and 5/8" wheel bolts.

Saltwater, slush, and road spray can eat through standard brakes fast. This kit’s Maxx coating holds up for over 1,000 hours in salt spray testing—far beyond zinc or Dacromet finishes. The stainless steel calipers won’t rust, and drainage holes in the hat section let water escape before corrosion can start. It’s a setup made to last through occasional salt exposure and harsh weather.

Heat buildup can lead to brake fade and uneven wear. DeeMaxx vented rotors move air through the core to cool faster, while the added drainage holes improve ventilation even more. The result is steady braking on long grades and less pad wear over time. These are the same design standards that helped DeeMaxx earn a passing grade on the SAE J2681 automotive brake test.

Everything you need to outfit one axle is included—two Maxx coat hub-rotor assemblies, zinc-coated calipers and brackets, bearings, races, grease seals, caps, wheel bolts, and lug nuts. Installation is straightforward with the patented caliper sleeve design that locks parts in place. Even the calipers have laser-etched bleeding instructions so maintenance down the road is clear and simple.


Each piece in this kit uses high-quality materials built for demanding conditions. The side-support bracket design keeps weight off the bolts to reduce wear and extend service life. With solid construction throughout and a 7-year warranty, these brakes are made for dependable performance season after season.
Videos are provided as a guide only. Refer to manufacturer installation instructions and specs for complete information.
I'm here with Brian from Jonesing To Go and he has brought his well, tell us about your setup a little bit. This is a 35-foot Montana by Keystone and right now, the way it sits loaded we're about 14,000 pounds. Today, we're gonna upgrade the brakes to hydraulic disc brakes. And this is something that I've been thinking about for quite some time. And when my wife decided that she's finally ready to start pulling the rig, I knew it's time. I've waited too long.
And so right now, I gotta be honest with you I'm like a kid waiting for Christmas. I can't wait to pull this thing and hit the brakes for the first time once this is done. I've heard nothing but fantastic things about what a difference it makes. And quite honestly, you know one close call on the road is one close call too many. And unfortunately, we have those on a regular basis.
So, you know, you always hear that term white knuckle. I don't know if it's white knuckle but when you're on the brakes on the truck and your hand is on the brakes on the brake controller all the way and you're just praying you get stopped in time you know, I've had enough of that. Now we're gonna take it in the shop and get our brakes installed. We're gonna meet up with Brian later and see what he thinks after. So we got the brakes installed, we're out on the road and this is really the maiden voyage with the disc brakes on.
So Brian tows his fifth wheel quite often, so I'm kind of excited to see his reaction as he stops. So once we get to a nice little straightaway we'll jab the brakes and see what it does. So we're on just kind of a industrial straightaway here. So Brian, go ahead, hit the brakes. Wow, what a difference.
I don't think I've ever felt this thing stop like this ever. Since the day it was new. Brad And gain's set at At five. Brad What do you normally have it at Nine. Brad Well, that's good. At nine, it's never, ever braked like this, ever. In fact, there's been times I've wondered if I'm getting stopped at nine. I'm excited about not only being able to stop, but the maintenance is gonna be so much easier. Oh my God, did you feel that (Brad laughs) I hardly pressed the brake. I think he's pretty happy. Yeah. I think he's gonna enjoy these. Now speaking of braking we've actually done a little bit of tests in our parking lot and it's not exactly out on the highway testing but what we've done is we've gotten up to about 15 miles per hour in our parking lot and just used the trailer brakes at full gain and allowed the drum brakes to do what they can to stop it. Now we've gone ahead and done the exact same braking test. Now just with our DeeMaxx brakes installed. Now for a quick visual reference you can see our cone over here to my left and that's where the front of the truck was before with his drum brakes. You can kind of see where his truck is now. So obviously, it's made a huge difference. We went from 117 foot down to 53. So more than half of what we had before. Imagine that being a car on the highway and you have to make a quick movement. Instead of being there, you can be here. So we've just gone ahead and done our post disc brake installation test. What do you think about that (stutters) I'm speechless. I knew it was gonna be good, I knew it was gonna be better. I hoped it would be that, and it definitely is. I'm confident in everything we do now. I'm confident when my wife is behind the wheel towing this now. Before, I wasn't so sure 'cause she's just learning. I don't know why I didn't do it before. Absolutely, and that's really for a towing experience confidence is everything. Being able to be comfortable behind the wheel and not white knuckle makes your trip enjoyable. And the best when it comes to brakes that's definitely something to it's something you wanna put your hat on saying that you have the best brakes because without stopping, well it makes for a not so great experience. It makes a bad day if you can't stop in time. One close call is one close call too many but they're very frequent out there because even though we drive defensively and leave space between cars especially in a metropolitan area there's always that one person that cuts in hits their brakes and, you know you don't know what they're thinking or what they're doing. We can drive as defensively as we want, it's the other guy. And reaction time is everything but the fact that I have the ability to stop now means the world to me. That's awesome. Thank you so much, Brian. Thank you.
Ratings & Reviews

Heather A.
4/10/2026
Thanks for sharing that, that’s a really important detail to call out. On setups like this, the included studs are typically sized for standard steel wheels, so when switching over to thicker aluminum wheels, it can definitely lead to needing longer studs like you ran into. I can see how that would be a frustrating surprise in the middle of an install. Glad you caught it and are getting it sorted out. Once everything is buttoned up, we’d be interested to hear how the full setup performs for you. What kind of trailer are you running these on?

John
6/24/2025
No problems so far. Working as expected.


Mike L.
10/21/2025
I'm glad to hear the install went well, please let us know how you like them!

Gwendolyn Y.
7/1/2025
Hey, thanks for saying that, Stanley! Maybe one day we can be as fast as light :)


Gwendolyn Y.
7/1/2025
Thanks for sharing your experience, Frank! I know Emma will be excited to hear that the brakes arrived early. Can't wait to see your picture when you're done with your project! What kind of trailer are you fixing up?
Info for this part was:
At etrailer we provide the best information available about the products we sell. We take the quality of our information seriously so that you can get the right part the first time. Let us know if anything is missing or if you have any questions.








Andrew N.
10/21/2026
Hey Steve! Thanks for the kind words and the detailed response! Sounds like you found exactly what you needed for your boat trailer. Was that your first time installing a brake setup like this? How was the install?