This fully welded trailer hitch receiver bolts onto your vehicle's frame with no welding required. 9" Long receiver tube helps get bike racks and cargo carriers past your spare tire. Powder coated steel is sturdy and corrosion resistant.
This edge glide gives you a smooth transition from the ground onto your trailer gate. The glide minimizes friction for snowmobiles but has built-in traction so you can still walk on it safely or load up your favorite off-road toy.
Hey Jeff! If your current lines are in good shape, you can just add a T-fitting and run lines to the second axle, no need to replace the main line. Your actuator and line size are already designed to handle multiple calipers on a tandem setup like…
Hey Joe, that's a great question but the 7,600 lb capacity for the CE Smith Safety Chains is for the pair and not individually. How much capacity are you needing?
In order to replace the Dexter 023-359-00 left hand and 023-360-00 right hand braking assemblies you will want to use the Dexter Nev-R-Adjust Electric Trailer Brake Kit part #23-464-465 which will replace both sides and it's a direct bolt-on…
To repair a Ram Series 12000 jack, like #TJD-12000SP-R2, we have the Gear Kit #TJD-12000-GR or the Replacement Rod and Nut #TJD-12000-RODNUT. Or you could need both. I just depends on what the problem is exactly.
The correct size drop to look for in a ball mount is specific to the truck and trailer. You'll want to get the one that allows you to tow multiple trailers yes but if you go with too much drop it can create ground clearance issues. Therefore,…
It looks like the Glo Brite Red 410 is a red side marker lamp. It seems like it's a skinny rectangle shape. We have an LED that resembles the Glo Brite Red 410 #MCL82RB. It's LED so it will last a LONG time! Waterproof too! This is the…
I attached a link on this page to the owners manual/install instructions for the Demco Hijacker Autoslide 13k hitch part #DM8550040 that you referenced for you to check out.
In order to find the right replacement leaf springs, you will need to raise the trailer up and take some measurements on one of the existing springs. This type of information isn't typically provided by trailer manufacturers and it's not…
The B&W Tow & Stow 3-Ball Mount #BWTS10048B do not come with a keyed locking pin to secure the shank to the receiver. For that I recommend the Master Lock Trailer Hitch Receiver Lock for 2" Trailer Hitches #1480DAT. If you want a locking…
For your 2018 VW Atlas, the Curt Trailer Hitch Receiver #C13366 will be about 1-1/2 inches recessed behind your bumper and will drop 8.44 inches from the mount to the bottom of the receiver tube according to my tech contact at Curt. The Draw-Tite…
Ford isn't super-clear about identifying the trailer lighting fuses in their owner's manual for your 2015 Ford F-250 Super Duty. I've shown several different fuses in the engine compartment and the passenger cabin fuse blocks that they…
We have what you are looking for. To replace the parts 363233.1 and 363233.2 you would want the part #185100-150. These are the exact same as the parts you are looking for. These are 12 inch by 2 inch assemblies with a 7,000 lb capacity.
Filters
