Replacement Al KO 363233.1 and 363233.2 Brake Assembly Availability

Question

Question:

I was able to get the part number but cant find the part do your guys have a way of cross referencing these AL-KO # 363233.1 and 363233.2 brakes

asked by: Nor C

0

Expert Reply:

We have what you are looking for. To replace the parts 363233.1 and 363233.2 you would want the part # 185100-150.

These are the exact same as the parts you are looking for. These are 12 inch by 2 inch assemblies with a 7,000 lb capacity.

expert reply by: Jameson C

0

Answer 1

Ford isn't super-clear about identifying the trailer lighting fuses in their owner's manual for your 2015 Ford F-250 Super Duty. I've shown several different fuses in the engine compartment and the passenger cabin fuse blocks that they…

view full answer...

Answer 2

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 3

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 4

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 5

Both the Roadmaster and Blue Ox tow bars are great options. But if it was my decision to make I would go with the Blue Ox Avail part #BX7420 as we have found that the Blue Ox tow bars are a little easier to connect and disconnect from. Also this tow…

view full answer...

Answer 6

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 7

According to Blue Ox, it'll take an experienced installer about 4 to 5 hours to complete the installation of their #BX1128 Base Plate Kit on a 2016 Jeep Grand Cherokee. The install isn't what I'd call super-difficult, but the installation…

view full answer...

Answer 8

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 9

Thanks for the information Kevin! To flat tow your 2025 Ford Bronco with a standard bumper and LED lights, I recommend the following parts: Tow Bar and Safety Chains - etrailer XHD Non-Binding Tow Bar for Roadmaster Direct-Connect item #e84ZR Base…

view full answer...

Answer 10

Hey Thomas, the Blue Ox Avail tow bar part #BX7420 would be a really great option. It's very easy to use and has longer arms which allows the towed vehicle to track a little better behind the tow vehicle. Now if you wanted a braking system that…

view full answer...

Answer 11

Hey Tom, yes the 2014 Ford Edge with the V6 engine is a great vehicle for flat towing. It's perfectly safe to do so as long as you follow the outlined instructions on how that are in the owners manual. The first thing you'll need to flat tow…

view full answer...

Answer 12

Hey Bryan, that's a good question. The pricing can definitely be misleading, but I wouldn't use it to judge the quality of the tire. A lot of that comes down to promotions, inventory, and whether you're looking at a tire by itself or…

view full answer...

Replacement Al KO 363233.1 and 363233.2 Brake Assembly Availability

Featured Help Information

Miscellaneous Media

Continue Researching