2018 GMC Acadia Salt Spreader

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

While we don't have any custom fit trailer wiring harnesses that fit the 2011 Isuzu NPR we can still help with a universal fit option like the #C56175 which you'd have to wire to the taillight circuits of your NPR.

Hi Dan, The etrailer Trailer Hitch Receiver #e36YR is 42" overall and the crosstube measures 36" in length. It's designed to fit 2019 - 2025 Chevrolet Blazers (excluding Premier models). If you need anything else just let me know and…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

Hello Dave. To install the Dexter Self-Contained Hydraulic Jack #DX72CR you will need mounting hardware since that is not included. You will also need a 12v battery like the Bright Way Deep Cycle RV Or Marine Battery #BRW44FR to power the jack.

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

The Isuzu NPR models are not factory wired for an electric brake controller. If you already have a 4-way trailer connector, then you will use the wiring kit #ETBC7 to hardwire your brake controller. If you already have a 7-way trailer connector, then…

Hey Dave, thanks for reaching out! The panels for the etrailer Hard Tonneau Cover #e73DR are about 21" wide, and when folded up in your 2024 Ford F-350 Super Duty they will take up about 2' when you include the other parts of the cover.

I recommend the Timbren Front Suspension Enhancement System #T74FR for the front of your Redesigned 2019 Chevrolet Silverado 1500. I feel that this system will provide you with better stability as the resistance will increase as the spring…

Yep, so long as your 2024 Subaru Crosstrek Wilderness is not a hybrid both the Curt and etrailer hitches will fit: - Curt Trailer Hitch Receiver #C13382 - etrailer Trailer Hitch Receiver #e98912 The only difference besides price is the finish; the…

Hello Andy, thanks for getting in touch. We do offer a 7-way harness for your 2023 Toyota Highlander. Take a look at the Tekonsha OEM Replacement Vehicle Wiring Harness #TK57VR. This will plug directly into the OEM 10-pin connector located on the…

Yes, it does Vince! The Curt Hitch item #C99FR has been confirmed to fit all models of the 2025 Toyota Highlander including the XSE and hybrid models. This class III hitch is custom fit and bolts to your Toyota with included hardware. It has a…