Result: taillight

Hi Bryan! The hub included with the CE Smith Trailer Axle w/ Idler Hubs - 5 on 4-1/2 - 57-1/2" Long - 1.8K #CE33201GA-HUB is designed to fit 13 to 15 inch wheels and has too large of a diameter for 12 inch wheels. With you having 12 inch wheels,…

A simple license plate holder that will get the job done is the Yakima PlateMate #Y02713. This installs on the bike rack or bikes using some hook and loop straps in multiple places so you can get the license plate in the best position. Attached is a…

For your application I recommend the Light Kit #20174 and 2 of the Mounting Bracket #BK70BB. These will mount under the horizontal bars for the Hollywood Racks Sport Rider SE #HLY84FR. When it comes to the license plate bracket I'm not quite sure…

Since your Solera arm is 58 inches long that would indicate it's a Solera Edge awning which means for a replacement drive arm you would want the part #LC22ED or for a replacement idler arm part #LC62ED.

Hello Michael, thanks for reaching out. We do carry replacement axles, so we may have something that will work for your Harbor Freight trailer. That said, there is no way for me to look up your trailer online to know the axle specs, so I will need…

Hi Jeff; the Taskmaster 4.80R12 Radial Trailer Tire #TT48012C will fit the Dexstar Steel Spoke Trailer Wheel #AM20122 you ordered. This is the same tire size you have now so clearance isn't an issue. It also has the M speed rating for 81 mph. I…

Hey Keith, The Furrion Tankless #FR93FR will fit into that cutout you have and be a good replacement. The water heater itself is 12-5/6 x 12-5/8 fitting nicely into your 13 x13 cutout. The depth of the heater itself is 19-1/4 which should fit nicely.…

On your 2014 Ford E350 Van with the factory towing package the brake controller port should be located behind the center of the dash above the stereo. You will need to remove the center panel above the stereo and to the left. Once it is removed there…

If you're looking for a new coupler to replace a Tie Down Engineering Model 20, I recommend the Demco Hydraulic Brake Actuator part #DM8204311 which like the Model 20 has a 20,000 lb weight capacity designed for a 2-5/16" hitch ball. It uses…

In order to determine if we have an axle that would bolt right up to what you have without welding we need to know the distance between your spring seats on center. We also need to know hub face to hub face dimension of your current axle as well.

The Kenda 5.30-12 Bias Trailer Tire with 12" White Wheel #AM30859 will fit your Harbor Freight trailer as long as it uses the same 5 on 4-1/2" bolt pattern. The larger pilot hole diameter is not a problem since the wheels are lug centric…

The parts and quantities do look mostly good, but you would only need one of the hanger kits #APS2. These are actually sold as a full kit for one axle. As to said axle, though, it would be a good idea to double check that your spring seats match the…