Since the Rola Cargo Carrier 59502 includes a 5/8"-11 hitch pin, I confirmed with my tech at Rola that the only confirmed locking hitch pin that is compatible is the HitchMate Threaded Trailer Hitch Receiver Lock for 2" Hitches #HE6001.…
Those keys are no longer available so you'll either need to go without the lock feature or you can get an entirely different rack. For a cost-effective bike rack replacement option I recommend checking out the Swagman Titan Bike Rack #S63400…
Rola discontinued their line of bike racks a while ago so while I do have a solution for you to continue carrying your bike, I unfortunately don't have a replacement part for you. Instead I recommend swapping your bike rack out to the RockyMounts…
There is not a replacement lock cylinder for your Rola threaded hitch pin #59915. Since you stated it is a 12mm hitch pin bolt, you may consider the Locking Anti-Rattle, Threaded Hitch Pin for Swagman Hitch Racks #S64029 which is 12 UNC coarse…
Hi Nicole; you have to identify the lock before you can find a replacement key. The number should be on the face of the lock core. The only key we're still carrying is the 014 #38373-014 so more than likely you will have to get the replacement…
Hello Jonathan, I can help with that. The R series Rola locks will have the letter "R" followed by 2 digits stamped on the face of the lock core itself. So, for example if your lock core has "R08" stamped on the face, then it is…
Hey B, No, the Rola swing away cargo carrier has been discontinued for a bunch of years now, and there are none of the receiver portion to go with the replacement pod #10188. Best I can offer is a new swing away carrier, part #Y62VR.
The enclosed part of GearDeck 17 Enclosed Cargo Carrier for 2" Hitches - Slide Out - 17 cu ft - Black Item #H00604 attaches to the tray part which attaches to the base/shank so it wouldn't go together correctly without all those parts. We do…
The Replacement Pod for Rola Enclosed Cargo Carriers #10188 for the Rola Swinging Enclosed Cargo Carrier, can hold a total of 13.5 cubic feet of gear. has an internal dimensions of: -47" long, and 21" wide at the bottom of the pod. -At its…
The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…
Filters
