Result: pr722

Hello Brad, thanks for getting in touch. I had our warehouse measure the Tri-Axle Teardrop Trailer Fenders #HP37VR. The center-to-center measurement for the wheel openings in 34". I edited a picture to help illustrate.

The Curt Spectrum Trailer Brake Controller part #C51170 can be installed on your 2020 Land Rover Discovery. You will need the Universal Installation Kit for Trailer Brake Controller part #ETBC7 and the ZCI Circuit Protected Vehicle Wiring Harness w/…

Hey Jeff, since you have a Bulldog powered 4k trailer jack part #BD500199 the correct replacement manual override rubber plug would be the part #BD500201.

Part AD2528E is a double-lip grease seal from NOK that cross-references to National seal part 470460. My research shows this seal has an inner diameter of 1.688-inches and an outer diameter of 2.560-inches. The nearest item we have is part #168255TB…

The center hangers in the Tandem-Axle Trailer Hanger Kit #APT8 that you recently purchased are indeed longer. This is actually pretty common for tandem axle trailers. The reason for the extra length on the middle hanger is related to the shackle…

It depends on the leaf springs you are using. Basically you will need to mock it all up before permanently installing anything on the trailer. Generally speaking the distance between hangers would likely be 24-3/4 inches on center to 29-1/2 inches on…

Thank you for the photo. I do have a solution for you, but based on the information printed on the label, your Lippert 6,000 lb axle has an 87 inch hub face and 68.5 inch spring center measurement, which none of our 7,000 lb axles are going to match.…

The MTI number on your 8-201 hubs is simply a casting number. It does not indicate any information about the hubs or have anything to do with the actual part number. I'm not surprised to hear you have different outer bearings between the two…

Yes. If you change no other components, the hanger length increase should directly correspond to the lift of the trailer. So, if you use a tandem axle kit like the Tandem-Axle Trailer Hangers for 1-3/4" Wide Double-Eye Springs - 3-1/4" Tall…

The recommended hanger kit for a Triple-Axle Trailer Hanger Kit for Double-Eye Springs is part #APTT1. This kit is designed to work on axles with capacities of 2,000 to 7,000 pounds. If your mobile home trailer axle is within this weight capacity…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

Dexter axles are the industry leader in terms of overall quality. They are made in the USA and if you look around online or talk to people in the RVing community they general consensus is the Dexter axles are just better made overall and will be more…