Replacement Double-Lip Grease Seal for EZ Lube Hub on 2005 TrailStar Boat Trailer
Question:
I am in need of a couple of rear seals for my Trailstar boat trailer. It is a 2005 PG16V trailer. The number on the rubber seal is AD2528E
asked by: Danny P
0
Expert Reply:
Part AD2528E is a double-lip grease seal from NOK that cross-references to National seal part 470460. My research shows this seal has an inner diameter of 1.688-inches and an outer diameter of 2.560-inches. The nearest item we have is part # 168255TB which has an I.D. of 1.687-inches and an O.D. of 2.561-inches.
If you have a digital caliper like # 301-17068 you can measure the spindle diameter where the seal rides and the hub bore where the seal installs to confirm the inner and outer seal dimensions you need for a replacement. Please refer to the linked photo.
click to enlarge
expert reply by: Adam R
0
Products Referenced in This Question
Double Lip Seal for 3,700-lb Marine Hubs
- Trailer Bearings Races Seals Caps
- Seals
- Grease Seals - Double Lip
- 1.687 Inch I.D.
- 2.561 Inch O.D.
- Dexter
more information >
Product Page this Question was Asked From
Feedback Sports Digital Caliper - 0" to 6" Range
- Bike Tools
- Cycling Caliper
- Feedback Sports
more information >
Featured Help Information
Miscellaneous Media
Similar Expert Q&A Pages
- Bearings, Races, and Grease Seal for Dexter 69-46 Axle
- How to Choose Replacement Lug Bolt or Hub
- How to Convert From Electric to Disc Brakes on Tandem Axle Trailer
- How to Select Correct 2,700 lb Hubs For Boat Trailer With Water Getting In
- How to Determine Correct Replacement Hub & Drum For Magic Tilt Boat Trailer
- How to Determine Correct Replacement Hub For Jet Ski Trailer
- How to Determine Correct Bearings, Seals, and Electric Brakes for Hub and Drum
- How to Determine Correct Hub & Drum Assembly For 7,000 lb Axle
- How to Determine Correct Replacement Oil Seal
- The Only Way to Determine Correct Replacement Bearings
- Parts Needed to Add Hydraulic Surge Drum Brakes
- How to Determine Correct Electric Brakes, Bearings, and Seals for 1967 Avion Trailer
- How to Find Correct Replacement Bearings and Seal for Harbor Freight Trailer
- Differences Between Trailer Idler Hubs With a 5 on 5" Bolt Pattern
- How to Choose Correct Replacement Bearings for a 2004 Haulmark Low Rider Trailer
- How to Determine Correct Hubs With 5 on 4-1/2 Bolt Pattern For Boat Trailer
- Replacement Rotor Hub Needed for a 2004 Four Winns Trailer
- How to Determine Correct Hub for Boat Trailer With 3,500 lb Axle
- Replacement Hub Components for Hub 9606020
- How to Find Replacement for TDE 11029C Hub Assembly
- Replacement Grease Seal for a 5013/29772
- Replacement Bearings and Seals for Dexter Axle 10K Axle with Oil Bath
- How to Determine if 2,000 lb Capacity Hub and Drum and Electric Brakes Will Fit
- How to Determine Correct Replacement Hub for Coleman Pop-Up Camper
- How To Figure Out the Correct Replacement Hubs for EZ Loader Boat Trailer
- Where To Measure the Axle To Determine the Weight Capacity
- How to Determine Correct Replacement Trailer Hub for 1-1/4 Inch Diameter Spindle