Result: leaf spring kits

Hey Mark! It's a little tricky trying to convert mobile home hubs/spindles to trailer hubs/spindles. Mobile home axles are usually one time use and don't really corelate to anything compatible on the trailer side. You do have some common…

You're very limited on suspension upgrades with a single axle on your 2020 Wolf Pup 16FQ. Since you're worried about suspension component failure, I would add the Dexter Heavy Duty Suspension Upgrade Kit for Single Axle Trailers #K71-358-00.…

Can you get me the length of one of your good leaf springs from eye bolt center to eye bolt center? With that I can see what you'd need.

Though I do tend to warn people about the ride getting stiffer when upping the capacity of their leaf springs, you are correct in that you will technically never be fully "unloaded". I do have to mention that this could still happen, but…

25-1/4 inch leaf springs are a very common length. For a leaf spring that is rated for a 2,500 lb axle that is 25-1/4 inches long you would want the part #e66SR. If instead you meant 2,200 lbs per spring you would want the #e44SR instead.

Hi David, In order to find the correct replacement leaf springs for your trailer we'll need to know the eye-to-eye measurement of the spring. You'll want to loosen the lug nuts on one wheel and then jack up that side of the trailer by the…

Shelby is no longer in business and would not be the same as Fulton; there are no ratchet repair kits available for Shelby so you'll need to replace your winch. Keeping in mind that a boat trailer winch has a boat-size-to-winch capacity that is…

Hey Rodney, it sounds like you've done your homework! That MoRryde set up you referenced is definitely going to upgrade your Dutchman's suspension and make towing it more comfortable. You'll want to take two measurements before ordering…

Hey Gib! Thank you for providing your axle capacity. In addition to the capacity, I will also need your leaf spring length so that means measuring. I recommend measuring the flat length, which is outlined in the attached article as well as the…

I see the QandA you were looking at and it seems we do have some conflicting info on there. I will be honest with you, that answer is very old and contains outdated/inaccurate information. This will be removed from our website. I apologize for any…

EZ lube spindles are more than just a zerk fitting attached to the end of the spindle. There would need to be a hole in the spindle between where the bearings ride for the grease would then fill the hub by. To be perfectly honest using EZ lube…

Hello again, Rob. Those Easy Grease Trailer Idler Hubs #AKIHUB-545-35-EZ-K you ordered use a lithium complex multipurpose grease. This is compatible with a variety of other greases, but what I recommend is the Red LubriMatic LMX Industrial Strength…