I have some part recommendations for you as the Dexter 8-283 hub is obsolete. This used a spindle which is also obsolete. I recommend having a new axle put on as it will be easier to upgrade your axle than having new spindles, brakes and hubs…
The Dexter 8-283 is an obsolete 2800lb 10 x 1-1/2 inch hub that used a LM67048 inner and a L44649 outer bearing. Unfortunately, we don't have any hubs that would be compatible with the spindles on your axle. Your best bet at this point would be…
I do have an option for you but that remove is currently obsolete. In order to replace it you must first upgrade the receiver to the Replacement 5-Function Remote Receiver with Replaceable Fuses part #LC305117 and then you can use the Replacement…
Hey Bud, we do not have a plug and play trailer wiring harness for your vehicle. For vehicle situations like this we typically have to recommend a universal style harness like the Curt #C59236.
Thank you for the photo! For your Ventline Range Hood PH CC0431-09 you're either going to need the motor #BVD0218-00 or the motor #BVD0218-00C. The first motor is for an unlisted range hood while the second motor is for a CSA range hood. To…
The Draw-Tite Max-Frame Trailer Hitch Receiver #DT37GR is the same thing as the 76527 hitch you already have so If it didn't fit it's not going to work. Instead, I'd recommend going with the Curt Trailer Hitch Receiver #C76WR which we…
Hey Ed, it looks like you won't need to remove the bumper to install the Curt Trailer Hitch Receiver #C76WR on your 2024 Ford Bronco Outer Banks. This hitch is just going to bolt onto your Bronco's frame requiring no welding or trimming, and…
James, I'm not entirely sure what wheel you're referencing but I was able to find a Vintage Accuride wheel which does appear to comparable to the Steel Dual Wheel with Offset #AM83NR. This wheel has a 8 on 6 1/2 bolt pattern, measures…
Hey Ken, We absolutely have a AC replacement that will simply plug right into your Coleman Unit making install super easy. If you just wanted to stick with the 13,500 btu like the original I recommend #ACCOL135. This is an Advent unit, but it comes…
The center of the hitch pin hole to the rear of the bumper on the Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4" #C65FR is 8". If this does not provide you with enough clearance, and your bike rack can also fit a 2" hitch,…
It looks like you ordered the Swagman XC 2-Bike Rack, part #S64650, and it's not clearing your Jeep well. You can always look at exchanging bike racks, but I believe I have a better solution. You can use a hitch extender to give you the clearance…
I found an online copy of the owners manual for your 2005 Ford Focus and Ford says that you cannot tow your 2005 Ford Focus with an automatic transmission with all four wheels on the ground. A tow dolly would probably be your best option to tow your…
Filters
