Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
The ends of the crossbars on the Thule Xsporter Pro Adjustable Height Truck Bed Ladder Rack #TH500XT referenced in your question feature a width of 3-1/2 inches and a height of 1-5/8 inches. I went out to the warehouse to confirm these measurements…
view full answer...I need two things to help you pick out the correct leaf springs for your trailer. I need to know the axle capacity of your trailer as well as the length from eye to eye without a load on your trailer. With those two pieces of info I can help you pick…
view full answer...Yes, but it's going to be an extremely small amount and you'll need to add springs that have more leafs than your current ones. You'll get maybe 1/4" to 3/8" per leaf of lift. If you could get the weight off of one side of your…
view full answer...Although I would not be able to speak on the installation of the part(s) you received for your trailer, I can tell you that the TremPro 644 Silicone Sealant part #0160297 will do an excellent job of sealing your new aluminum panel to the trailer and…
view full answer...In order to re-seal the panels on your trailer you can use the TremPro 644 Silicone Sealant part #0160297 as an alternative to the Loctite Urethane Sealant part L0150811. The TremPro 644 Silicone Sealant has a similar compound to the Loctite Urethane…
view full answer...Increasing the tire and wheel size can increase the height of the trailer but it's usually quite minimal. Before you do anything else you should see if the pin box can be adjusted. Although you have to be careful here since This will lower the…
view full answer...The best solution is going to be to go with a double eye leaf spring setup instead of what you have now. For that the leaf spring part #e57SR is for a 4,000 lb axle and has a 25-1/4 inch length from eye to eye. Then for a hanger kit you'd want…
view full answer...I can't find any info on that part number. Is it a tonneau cover from Pace Edwards? What is year/make/model of the truck and what is brand and model of tonneau?
view full answer...According to Pace Edwards, the FM2051 is indeed a Full Metal Jack Rabbit tonneau cover. The #PE78UV sweep seal would be the correct replacement gasket, which my Pace Edwards representative has confirmed.
view full answer...Hey Gabe! We have a couple of options for replacement seals and gaskets for the JackRabbit tonneau covers. I have listed them below: Replacement Sweep Seal Roll for Pace Edwards Retractable Hard Tonneau Cover - 16' Long item #PE78UV Replacement…
view full answer...The Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV does not come with great instructions. In order to install the Replacement Tailgate Top Seal for Pace Edwards Retractable Tonneau Covers #PE99CV, you will need to…
view full answer...The biggest advantage and reason most people go with a larger trailer tire is the increased weight capacity that the larger tires offer. The larger diameter offers a negligible amount of better ride quality for the trailer since the larger the tire…
view full answer...Related Searches