Search: Reese Gooseneck Ball   >   Trailer Breakaway Kit   >  

The safety chain loops on your 2017 Ford F-350 with the factory puck system should be installed in the pucks closest to the tail gate. So if you were installing the Reese Elite Series Pop-In Ball Kit for Ford Super Duty #RP30137, which fits your…

To know if your 2017 Ford F-350 has an in-bed puck system installed you'll just need to look and see if you have four rounded attachment points (usually covered up when not in use, like in the attached picture). If you don't…

The Goose Box Doesn't specifiy the height required from the ground to the ball. Instead it specifies the height from the coupler connection to the front bottom bolt where the pin box attaches. I've attached photos of these…

So the ideal amount of clearance between the trailer overhang and the bed rails of the truck is 6 inches while the trailer is sitting as level as possible. If your trailer sits perfectly level and you currently have 5 inches you probably will be…

The Curt CrossWing Lightweight Gooseneck-to-5th-Wheel Trailer Hitch Adapter part #C32DR and part #C92DR are the exact same. This hitch is designed to attach to a gooseneck hitch and provide a connection for a fifth wheel hitch. Therefore, if you…

When it comes to replacing the coupler on your 1994 Featherlite Horse Trailer The B&W Defender Locking Gooseneck Coupler Inner Tube - Round - 2-5/16 inch Ball - 25,000 pounds #BWGNC4250 will work for you if the existing coupler on your…

Yes, you could weld the Reese Elite Series 5th Wheel Rail Puck Adapters part #RP30149 directly to your flatbed. However, there would be no real way to then formulate any sort of weight capacity for the system once done so. The pucks really need to…

As long as the maximum load applied to the #MX59FR Maxion Vesper 16 x 6 wheel doesn't exceed its 4460 lb capacity, the wheel can handle the pressure of any tire that can be mounted on it, which I confirmed with the manufacturer.

Yes, the pop-in style gooseneck trailer hitch balls are cross compatible between the different factory puck systems from Ford, Ram, GM, and Nissan. For this, we have a few options such as the Curt Pop-In Ball part #C60629 which has a rise built-in…

The factory prep package or pucks are not the same between Ram, GM and Ford. The spacing is all different which means you cannot use a 5th wheel hitch for Ram pucks on a GM with pucks. Take the Curt A25 5th Wheel Trailer Hitch for example which is…

I checked with Curt and the footprint dimensions of the base of the Curt CrossWing Lightweight 5th Wheel Hitch part #C92DR are 25.8 inches front to back and then 42 inches from left to right.

The B&W Ball and Safety Chain Kit for Ram Underbed Gooseneck Trailer Hitch #BWGNXA2062 is a high quality choice of gooseneck hitch that is corrosion resistant in a stainless steel finish. This Gooseneck is capable of a gross towing weight…