Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
To determine whether or not the B&W Tow & Stow 2-Ball Mount #BWTS20037B will work properly on your 2022 GMC Sierra 2500HD with the Rock Tamers #ERT00110 you will need to measure from the center of your hitch pin hole to the face of the hitch…
view full answer...Based on the lip on the Curt Channel-Mount Coupler - Squeeze Latch - 2-5/16" Ball - 15,000 lbs #C25328 you will be unable to use the #e98895. The #e87ZR might fit, but I would question how secure it is once again based on the lip on that…
view full answer...Hey Daniel, the closest option to what you need that we have is the part #JR79ZR which has 7-7/8 inches between the mounting holes but we don't have any options that have 8 inches between them.
view full answer...I have another option for you, but there is not a no drill mounting bracket that has a longer clamp than the #C57202 you purchased. Instead I recommend the Curt Easy Mount Bracket #C58003 which will mount to the receiver tube of the Curt Trailer…
view full answer...I did some research and found that the Erickson O-Track Cargo Control System like part #EM59133 is very similar to the L-Track systems you referenced. The Erickson O-Track is 18 inches long and includes 2 Spring-loaded O-ring clips and mounting…
view full answer...We may have a replacement hub for your Dayton Fayette 9254, but the only way to be sure is by determining which bearing combination and grease seal your spindle uses. You will need to remove one of the hubs and look for the bearing numbers stamped in…
view full answer...To replace your 12" brakes I recommend checking out the 7K TruRyde Electric Trailer Brake Kit #TRU96FR or the 5.2K - 7K Hydraulic Trailer Brake Kit #AKUBRK-7 depending on what kind of braking system you have. You'll also need the Mounting…
view full answer...We have a really great trailer jack replacement for what you have with the etrailer Sidewind Jack part #TJA-5000S-B. This is a sidewind jack like what you have but as you can see in the attached install video it can install with the handle on the…
view full answer...Yes, you can splice into the tailgate handle lock/unlock wires if equipped when installing the Pop & Lock Power Locking Handle for Truck Caps and Hard Tonneau Covers part #PAL9555. The provided instructions are used when there is no locking…
view full answer...Although it is not sold as a set like the #e68ZR, we do have these locks available with a keyed alike option. You will need the etrailer Adjustable Trailer Coupler Latch Lock #e98883 and the etrailer Hitch Receiver Lock for 2" and 2-1/2"…
view full answer...I agree that you most likely have an issue on the truck side. The voltage at the brake magnets when the vehicle is sitting still and the brake pedal is pressed will only read a small amount with the Ford integrated brake controller on your truck. If…
view full answer...The Trailer Hub and Drum Assembly part #AKHD-545-35-EZ-K would be an excellent replacement for a Tru-Ryde Hub/Drum RVD-H-545. Then for new brakes, I recommend the Hydraulic Trailer Brake Kit part #AKFBBRK-35.
view full answer...