Result: RM676

Hey Tracy, for your 2025 Jeep Wrangler we have the Curt tow bar wiring kit part #C96JR as a fit that does not require any splicing. This installs easily by plugging inline with the vehicle taillights. Since it uses a 4-way connector and you have a…

Hey Terry, thanks for reaching out! Yes, the Demco Stay-IN-Play Duo #DM86VR wiring can be spliced into the Curt Custom Tail Light Wiring Kit #C96JR but you'll need to add a Diode #RM-690 to each circuit to avoid backfeeding. So this will work,…

Hello Marvin, thanks for reaching out. The Curt Custom Tail Light Wiring Kit #C96JR is correct for the 2023 Jeep Wrangler 4XE. The harness has built in diodes so it is completely safe to use on your Jeep and will not damage the electrical system when…

Hey Michael, the install of the etrailer base plate kit part #e96GV does require moving the adaptive cruise control bracket in most situations. That is still true so it would be likely you'd need to move yours on a 25 Maverick Lariat.

Hi Mark; we originally carried these over but both Roadmaster and Blue Ox found there was some kind of sensor issue that required a redesign for the 2025. I can assure you that these companies would not take the time to design a new base plate if the…

The correct Curt wiring kit for your 2024 Ford Explorer is the following: - Curt T-Connector Vehicle Wiring Harness #C56093 This kit will tee in behind your tail lights and then has a 12V power wire that you run up to your battery to power the…

Hey Steve, thanks for reaching out! The Roadmaster Direct-Connect Base Plate Kit #RM87NQ fits your 2025 Ford Maverick as long as it's the Hybrid model that doesn't have the engine block heater. It doesn't come with the 6-Pin connector,…

Hi Pat; I can definitely help you get the parts you need to flat tow your 2024 Ford Maverick Hybrid. You will need a base plate kit, tow bar, safety cables, tow bar wiring, and a supplemental brake system. I recommend the following: -Roadmaster…

Hey Ron! For your 2025 Ford Maverick I recommend going with the Roadmaster InvisiBrake Flat Tow Brake System #RM-8700 with the Roadmaster Stop Light Switch Kit #RM87GR and the Roadmaster Brake-Lite Relay Kit for Towed Vehicles #RM-88400. For wiring,…

Hey Shawn! You can definitely mix and match manufacturer's when setting up a flat tow. The one major thing you really have to pay attention to is the compatibility of the tow bars with the baseplates. You can mix up brands but they have to have…

Yes the Roadmaster Battery Charge Line Kit for Towed Vehicles, #RM-156-25 is minimal cost and while not "needed" for many applications it is a good item to add as it maintains the battery charge in your towed vehicle while the car is being…

The Roadmaster Battery Charge Line Kit part #RM-156-25 will work to provide a charge line from the trailer wiring connector on your trailer to the trailer battery. If the trailer wiring of your Goldwing does not have a 12 volt accessory circuit…