Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?
Hey, Linda. After doing a bit of digging and research, I found that the Thomas Payne Trifold RV Loveseat in Seaport Mink, part #LC94FC, is made with PolyHyde material, which is known for its durability and easy-to-clean surface. It’s also backed by a…
Hey Jerry, great question! Yes, if you found another slide out that is rated for only 5,000 RPM then you'll be cutting the movement of the slide just about in half. The Lippert Venture Actuator and High Speed Slide-Out Motor #LC168956 that…
I reached out to my contact at Lippert and he said there are a couple of things you will want to look at to try and troubleshoot the blank display on your Level Up touch pad. He said to first remove the pad itself from where it's mounted (keeping…
Thanks for the pictures! The Replacement Converter for your Magnetek Converter Series 6300 Model 6332 is going to be the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 35 Amp item #PD4635V.
The LaSalle Bristol Toilet Floor Flange w/ Spigot for RV - ABS Plastic - 3" Hub x 4" Diameter #3446336347 will use the LaSalle Bristol ABS Solvent Cement - Black - 1/2 Pint #3447530889. You will simply then just need the length of 3 inch…
Hey Rodrigue, The Thetford Aqua-Magic Vi #TH24SE is going to have the similar design as the previous Aqua-Magic in it being hollow between the bowl and outer casting. I attached a photo of the toilet from below where it would attach to the black tank…
The only difference between the 010-036-00, our part #GS-2250DL, and the 010-054-00, our part #RG06-070, is that the 10-036 comes as a single unit while the 10-054 comes with 2 seals. Other than this they both have the same ID of 2.250" and OD…
Hey Pete, thanks for the picture and information. Since the Thetford 42070 is an Aqua-Magic Style II toilet, the Replacement Water Valve item #TH78SA will indeed fit it. This kit will replace the valve and the seals around it.
I spoke with my contact at B&W regarding the Turnoverball Underbed Gooseneck Trailer Hitch w/ Custom Installation Kit #BWGNRK1116 referenced in your question. She stated that the estimated/average installation time for this kit is around 2 hours.…
The installation time of the Universal Installation Kit for Trailer Brake Controller part #ETBC7 will vary largely by skill level. That said, for a beginner/novice I would estimate around 2-4 hours from start to finish. It's not hard per se but…
Filters
