What is Sleeping Surface Depth of Thomas Payne Sleeper Sofa

Question

Question:

What is the depth of the sofa when extended in bed form? We have a 2015 Jayco 38FLSA with two sofas like this facing each other. Also can fabrics be special ordered?

asked by: Nicholas S

0

Expert Reply:

Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part # LC94FC that you referenced is 70 inches. Is that big enough?

expert reply by: Jameson C

0

Sofa
(click to enlarge)

Nicholas S.

1/29/2026

That seems like it would work. We really don't want the leather like upholstery because of the problems with the fabric degrading. Can fabrics be special ordered?.

Jameson C.

1/29/2026

@NicholasS Sorry I missed that aspect of your question initially. No we don't have a way to special order fabric for any of the sleepers we offer. The part # LC54FC is smaller but made from a woven material instead.

Nicholas

1/29/2026

@JamesonC That's fine We will probably order one and see how it fits. Right now we are down south for the winter and will wait until we get home.

Jameson C.

1/29/2026

@Nicholas right on! If you have any other questions just let me know!

Answer 1

Hey, Linda. After doing a bit of digging and research, I found that the Thomas Payne Trifold RV Loveseat in Seaport Mink, part #LC94FC, is made with PolyHyde material, which is known for its durability and easy-to-clean surface. It’s also backed by a…

view full answer...

Answer 2

Hey, Linda! Welcome back. The warranty is 7 years from the date of purchase. That applies to the trifold sofa, part #LC44FC, you’re looking at, as well as all other Thomas Payne furniture we carry. As for a matching theater set, there isn’t one…

view full answer...

Answer 3

Hey Tyler, the bed width of the Thomas Payne Trifold Sofa part #LC64FC is 72 inches. Would that be wide enough?

view full answer...

Answer 4

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

view full answer...

Answer 5

Hey Andrew! Yes, Furrion does have a Chill Cube model with a heat pump. This was actually just released for aftermarket sale. You will need a complete system to make the switch, new R32 units aren't backwards compatible with old R410A systems.…

view full answer...

Answer 6

It sounds like you are speaking of the wires for the brake magnets. If this is correct, you will need to connect one of the wires to the brake controller output wire on your trailer connector and the other wire will need to be grounded to a clean…

view full answer...

Answer 7

The #84 spindle is just a common way to identify the spindle dimensions typically used for 3,500 lb axles. So instead of listing out the parts, people can just say they have #84 spindles and it's easier to know what fits it. The CE Smith Trailer…

view full answer...

Answer 8

Hey Nicholas, the front to back depth of the sleeping surface of the Thomas Payne Sleeper Sofa part #LC94FC that you referenced is 70 inches. Is that big enough?

view full answer...

Answer 9

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

view full answer...

Answer 10

That's a very good question, we tend to be extra cautious and say to use 10 gauge wire because that would be more than enough. When you get into longer trailers that will end up using a lot of wire the heavier gauge wire becomes more necessary.…

view full answer...

Answer 11

Hey Steve, thanks for reaching out. The Thomas Payne Trifold RV Loveseat and Sleeper #LC92PX is approximately 70" long with the bed extended out. Will that fit in your living room? Is it more for a nightly sleeper or just for guests/kiddos?

view full answer...

Answer 12

Hey Jason! When you fold out the Thomas Payne Trifold RV Loveseat and Sleeper #TP55CR it will be 70" long. The full sleeping surface dimensions are 56" x 70" x 19". Are you replacing a worn out sleeper or upgrading furniture?

view full answer...

What is Sleeping Surface Depth of Thomas Payne Sleeper Sofa

Product Page this Question was Asked From

Continue Researching