Result: Casters

The SolidStep Manual Fold-Down Steps for 25" - 28-7/8" Wide RV Door Frames - Double - Aluminum Item #LC733931 was designed to fit in an entry way doorframe that has 25" to 28-7/8" in width and 22" to 28" in entry height.…

I checked with Yakima and they informed me that the length of the Replacement Tongue for Yakima Rack and Roll Trailer #8880204 is 69 inches.

You are correct, the Replacement Tail Block Locking Assembly #8880334 is only for the 2015 and up model year Rack and Roll trailers. According to Yakima, the reason is the thickness and length of the shaft was increased, so it's a different size.…

The exact replacement hub assemblies you need are the AxleTek Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K. These assemblies come with the bearings, races, seal, grease cap and even the lug nuts…

The exact replacement hub assemblies you need for your BD2-545-17 are the etrailer Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 #AKHD-545-35-K that you referenced.

One easy way to prevent someone from removing the ball would be to use a ball mount that has the ball attached (welded) to the shank. That way you won't have to weld a ball to a shank that isn't meant for that type of modification. Some…

Typically it's the tires of a utility trailer that get problematic if stored for long periods of times. Although there are not exact rules for how to store a trailer tire. Our experience shows that the most beneficial way to store a trailer tire…

The Replacement Tongue for Yakima Rack and Roll Trailer #8880204 is 3/16" thick. The overall dimensions are 69-5/8" long x 2" wide x 2" tall.

When you convert the width of your 180mm tire into inches, it's going to be 7.08", and the E-Track Wheel Chock #3481731 is designed to handle a maximum of 7" tires and you're going to be right at the cusp. Since we're dealing…

As long as you didn't peel the sticker off it would be on the inside handle of the door. I attached a picture that shows code G310.

I have an option for you. Since you mentioned that you already flipped your axles, the Correct Track Trailer Alignment and Lift Kit - Tandem Axle #RR23QX will work to accomplish the lift you are needing. The Correct Track Trailer Alignment and Lift…

Since your axles are already below your leaf springs the only option is the Correct Track Trailer Alignment and Lift Kit item #RR23QX. This kit mounts to your spring hangers and moves the attachment point down 1-1/4" or 2-1/4". This method…