Replacement Hubs for BD-545-17 Drum Brakes and Braking Assemblies
Updated 03/16/2018 | Published 03/15/2018
Products Featured in This Question
Question:
I NEED TO REPLACE DRUMS AND BACKING PLATES ON A CAMPER. THEY ARE 10 INCH 5 LUG, WITH BD-545-17 ON THE DRUM. WHAT DRUMS CAN I USE? ALSO, CAN I USE DEXTER BACKING PLATE SETS?
asked by: DANA D
Expert Reply:
The exact replacement hub assemblies you need are the AxleTek Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 # AKHD-545-35-K. These assemblies come with the bearings, races, seal, grease cap and even the lug nuts needed. You can absolutely use the Dexter Nev-R-Adjust Electric Trailer Brake Kit # 23-468-469 with these hubs and they will work great. If you don't want the Dexter name brand, you can use the Electric Trailer Brake Kit - Self-Adjusting - 10" - Left and Right Hand Assemblies # AKEBRK-35-SA made by the same company as your hubs. Both options are self adjusting so you will not need to manually adjust your assemblies as they wear for best braking as they will automatically do so.
Product Page this Question was Asked From
Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Trailer Hubs and Drums
- Hub with Drum
- Standard
- L68149 / L44649
- Standard Grade
- For 3500 lbs Axles
- 1/2 Inch Stud
- 5 on 4-1/2 Inch
- 13 Inch Wheel
- 14 Inch Wheel
- 14-1/2 Inch Wheel
- 15 Inch Wheel
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Shop: Dexter Trailer Axle with Idler Hubs - 5 on 4-1/2 Bolt Pattern - 89" Long - 3,500 lbs
- Search Results: ez lube spindle washer
- Search Results: timken l68149
- Search Results: timken trailer bearings races seals caps
- Search Results: 84 spindle wear sleeve
- Search Results: trailer leaf springs
- Shop: Dexter Trailer Idler Hub Assembly for 3,500-lb Axles - 5 on 4-1/2
- Shop: Dexter Nev-R-Adjust Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Video: Complete Breakdown of the Dexter Nev-R-Adjust Electric Trailer Brake Assembly
- Shop: Easy Grease Trailer Hub and Drum Assembly for 3.5K Axles - 10" - 5 on 4-1/2 - Pre-Greased
- Search Results: flush mount d rings
- Search Results: brake spoon
- Q&A: Replacement 3,500 lb Axle for a Covered Wagon Cargo Trailer
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Options For A Dometic RV Air Conditioner Model # 57915.541
- Q&A: Removing Trailer Bearing that is Stuck on Spindle After Removing Hub
- Q&A: Can you Determine The Correct Replacement Key For a Master Lock Coupler Lock Without Having The Key?
- Q&A: Replacement Key For Master Lock Coupler Lock
- Q&A: How to Get a Replacement Key for a Master Lock 389DAT Trailer Coupler Lock
- Shop: Base Plate for Tow Bar
- Q&A: Replacement Grease Seal for Axletek Hub BD-545
- Shop: Suspension Enhancement