In order to calculate where the axles would go on your trailer, there are several things that need to be taken into consideration. You will have to mock up the trailer with the suspension and axles to get the weights needed to determine where the…
I spoke with the engineers over at Timbren. The reason that they do not recommend the axle-less suspension systems, such as #ASR5200S01, for triple axle applications is because there is no equalization between what would be the axles of the trailer.…
I do have a solution for you but we don't offer any integrated winch and bow roller setups like the Knot Autoflex. Therefore, you'd have to purchase a winch stand assembly like the CE Smith Winch Stand part #CE31013G which bolts onto the…
I attached a picture that we recieved from a customer that shows the CE Smith winch mount #CE31013G installed and in use on a trailer for you to check out.
Hi Michael, While we don't have any way of knowing what winch stand goes on any specific trailer, it is possible we have an option for a winch stand for your Karavan trailer. The only option we have for a stand is the CE Smith Winch Stand…
If you look at the provided photo, you can see the hole spacing on the mounting pad of the Buyers Products #337HW800S 800 lb capacity trailer winch. 1/2 inch hardware is recommended.
Hey Michael. We have quite a few options for standard rubber bow stops but which one you need is going to come down to how wide your current uprights are. One of the Yates Y-Style Bow Stop for Boat Trailers like the 6-1/2" span item #YR6Y33-4 is…
I have a solution for you, but we do not carry an adapter like you mentioned to mount a square tube jack to your existing winch stand. The best option for your set-up may be to use a jack like the Pro Series Square Jack with Footplate #PS1400850383.…
When it comes to choosing a winch for a boat trailer, there are a few general rules we can use. The boat-size-to-winch capacity is generally 2 to 1. With good rollers and short winching distances, the ratio can increase to 3 to 1 and with wooden…
The discontinued Shelby 5407 is a single-speed, 1,700 lb hand winch, and we can get you a replacement with a higher capacity. The best option for that is a winch from Dutton-Lainson: - Dutton-Lainson Hand Winch #DL14881 The #DL14881 is a 3,500 lb…
Since the Malone EcoLight trailer part #MAL53FR has a tongue width of 2 inches you could use the tower kit part #CE31013G which is 30 inches tall as this is designed to fit 2 inch channels. Then you could use a winch like the Buyers Products part…
I have a 5 inch roller, but the largest Bow Roller Assembly that we offer is a 4 inch, like part #YR450Y-400Y. The CE Smith Deep V Keel Roller Assembly #CE10401G is 5 inches and will accomplish the same task that a bow roller will. The only…
Filters
