It sure can Darla. The Thule GateMate Pro Tailgate Pad item #TH824PRO is not going to interfere with towing your travel trailer. The wheels on your e-bikes will drape right over the pad like the picture attached below. You'll still have plenty of…
The Aero Crossbar SmarT-Slot Kit 2 for Yakima FatCat Ski and Snowboard Carriers #Y03098 is not compatible with your Yakima Powderhound 4. This has been confirmed by Yakima that there is no adapter for the Powderhound 4, and the only mounting hardware…
I like where you were going with mounting the Thule SnowPack #TH7326B on the Thule Elite Van XT #TH302043. I went to the warehouse and verified that the T-Bolts that come with the SnowPack will indeed fit in the tracks that are used for the Elite Van…
To use your Hollywood Racks Sport Rider SE Bike Rack item #HLY84FR on a 2023 Tesla Model 3, I recommend the etrailer Hitch Item #e33ZR. This hitch is custom fit and bolts to your Tesla with included hardware. I really like the etrailer Hitch Item…
According to Rhino Rack, if you were to go with the shorter bars, you'll only have 1-1/4 inch of leeway on each side which isn't enough in their opinion. I'd recommend going with the 71 inch bars so you'll be certain of a good fit. As…
The difference between the Dexter Electric Trailer Brake Kit - 12" - Left and Right Hand Assemblies - 7,000 lbs #23-180-181 and the #23-105-106 you mentioned are the strength of the brake magnets. The #23-180-181 was designed for 7000lb axles…
We do have all the parts you will need but they are not available as a complete kit. First you will need to decide if you would like to install the Dexter Electric Trailer Brake Kit #23-105-106 that includes left and right brake assemblies for one…
I really suggest you just take the trailer back to the dealer and have them fix the issue because the second you try to fix their mistake, the warranty for the work they performed goes out the window. That said, if the brakes are humming then that…
I was unable to find exactly what size spindle comes on your M116A3 trailer so you are going to need to remove one of your hubs to measure the spindle and determine if the Hub/Drum #8-201-9UC3-EZ will fit your trailer. I have included an image…
Hey Ricky, yes the Dexter Nev-R Adjust assemblies part #23-458-459 that you referenced will fit a 5.2k 12 inch drum like you have. The 6k and 5.2k axles use the same size drums. Are you by chance wanting better braking strength?
Even though I cannot comment specifically on the grease you used because I am not familiar with it, I can tell you the best grease for trailer bearings is a a grease with a rating of GC-LB, which just means it is made to withstand very high…
The AL-KO brakes can have a few different mounting patterns, so I recommend measuring to double check. I included a picture of how the Dexter #23-458-459 will measure to compare as well. Odds are these are correct, but it never hurts to double check.…
Filters
