Hey Dave. The T5079 RV Designer Entrance Door Lock item #RD68SR is made of a die-cast zinc alloy for the housing and handles. The strike plate, plunger load pins and plunger end plates are made of steel. The parts are then black powder coated and…
Slipper Springs like #e33SR do not use a bolt and bushing for the open eye end of the spring. It connects directly to the hanger using a slipper spring hanger kit.
To switch to a Double Eye Spring #e48SR you would need to also change out your Rear Hanger #30-20 since you will be adding Shackles #K71-358-00. This is required since the rear hanger has to be 1-3/4" wide on the outer versus at least…
Hey Walker, thanks for reaching out, and thanks for the pictures. We do have a bearing for the TJD-7000 jack part #TJD-7000-BR but its a 0.75" ID/ 1.519" OD so it sounds like this won't match up with your jack. Without knowing the brand…
In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.
Hey Ryan. We only have one hub that'll fit a straight spindle with 1-3/8" item #L68149 inner and outer bearings. It's the Dexter 9-3/4" Hub-and-Rotor Assembly item #DX82UR. This zinc coated hub and rotor assembly has a 5 on…
Hi Collin, welcome back! The most economical replacement is going to be from Advent Air. You will need a complete system since everything moved to R32 refrigerant. If your upgraded thermostat is R32 compatible, or a smart thermostat that got a…
Hi Angela; you will run air ducting (not included) off of the openings on the side of the Coleman-Mach Underbunk RV AC #CM62RR. I recommend getting the All-In-One kit #CM82RR which includes all of the accessories you need for installation. The unit…
Typically, when the outside edges of a tire are showing wear its because the tires are under-inflated. The solution is to inflate the tires to the maximum pressure listed on the sidewall. Now if the outside of tires have what looks like gouges are…
Hey Darryl, thanks for reaching out. Yeah, you definitely got a little carried away on the grease, and you’re not the first one to do it after watching a few videos. 14 oz is way too much, and what happens is exactly what you saw, it pushes past the…
Hey Oscar, yes you can use a Curt tow bar like the Rambler part #C25DQ with a Blue Ox base plate kit like the part #BX3620 that you referenced. Do you have a Curt tow bar already? What are you flat towing?
Hello Chris, Thanks so much for writing in and a double thank you for including the full brake assembly part number. That is incredibly helpful! Since you have the Kodiak Disc Brake Kit 11.35" Rotor #120 Spindle 12K ALKO #K2HR12A11-120DW, you…
Filters
