Hello Sylvie, thanks for reaching out. The Everchill RV Mini Fridge #EV46RR is a freestanding fridge and does not come with any brackets or hardware for securing it. According to the manufacturer the walls or panels surrounding the fridge are enough…
The Red Label bags like the part #F2706 are much heavier duty than the standard duty bags like the #F2598 that you also mentioned. The pressure rating is 150 psi vs. 100 psi, the weight capacity is 7,500 vs. 5,000 lb, and overall they are just larger…
Choosing the right height setting for your 5th wheel hitch is a combination of a few different variables. First of all you want your towing setup to be as level as possible. With your Montana High Country 340BH level you will want to measure from the…
I have included a couple of pictures that show where to plug in a brake controller on a 2001 Chevy Silverado. You are looking for the black junction box located towards the back left corner on the drivers side. Remove the cover and you will see a…
While it looks like you are pretty close to finding the correct port for installing a brake controller in your 2001 Chevy Silverado I attached a picture of where the install harness does plug in using a harness like the part #3025-P. For a brake…
I did some checking and the hub/drum we offer that will work for you is the part #8-430-5UC3. This uses the same bearings as the 8-415 and will be an exact fit aside from the fact this is a non-ABS setup and the 8-415 came in an ABS setup and non-ABS…
Coupler #CA5100B measures 9-1/4 inches wide at the widest part. I have included a picture showing some dimensions for you. For coupler #CA5400 is measures 11 inches wide at the widest point. I have included links to the video reviews of these…
According to Lippert that is a 6,000 lb hub and drum assembly with a 6 on 5-1/2 bolt pattern using #25580 inner and #15123 outer bearings. You do not need to use a replacement part from the same manufacturer so for a replacement you can use the…
I spoke to my contact at Valterra and found that the #A10-5030FBK steps down a 50 amp service receptacle (2 X 120VAC) to 30 amps supply. This would work great for your camping trailers electrical system. I have linked the above mentioned product to…
The hub you have is a 3,500 lb idler hub that has a 5 on 5 inch bolt pattern so you'd want the part #AKIHUB-550-35-K and you'd be set! This comes with bearings, lug nuts, a grease seal, and a grease cap/dust cover. Or, we have the part…
Both the CTEK US 0.8 Universal Battery Charger with Pulse Maintenance part #CTEK56865 and the Bright Way Solar Battery Charger and Maintainer part #BRW54FR would work well for this application. I prefer the solar option as it wouldn't require…
Filters
