A Closer Look at the Stromberg Carlson Trailer Tray Cargo Carrier Video

Thanks for the kind words. You are definitely correct that the Jack-It 2 Bike Rack for A-Frame Trailers - 22-1/2" Jack Clearance #LC429756 requires you to remove the tray in order to install it on your 2017 Casita A-frame travel trailer. If you…

As long as you have the generator secured on the Stromberg Carlson Trailer Tray Cargo Carrier, part #CC-255, you can run the generator while it is mounted on the carrier. I recommend using s-hook ratchet straps like part #SM54FR. These are 1-inch…

I do have a possible solution for you but unfortunately there aren't any battery boxes available that will hold two 12V batteries and fit within a 21" length and 8" width. The closest thing we have is the TorkLift PowerArmor Locking…

No, the Stromberg Carlson Trailer Tray Cargo Carrier part #CC-255 would not interfere with the frame brackets on any of the Equal-i-zer Weight Distribution Systems. The reason for this is because of its wide range of adjustability. The Equal-i-zer…

If you can't place any weight on the trailer in any way that limits a lot of the options. Basically you'd have to decide if you could fit in in the interior or use a bunk like part #CC-255 as a platform on the tongue of the trailer. This is…

It will be a close fit but your 18" x 25" generator will fit on the tray of the Stromberg Carlson Trailer Tray Cargo Carrier #CC-255. If you look at the linked photo you can see that the very front of the tray measures 24-3/4" long,…

I don't think you'd have any issue removing your propane covers with the #CC-255 installed. If you check out the pictures I attached you'll see this installed on a trailer that has the white version of your cover installed. In the last…

The Mount-n-Lock GennyGo Generator and Cargo Carrier MNT34FR is meant to be mounted on the bumper of your RV and cannot be mounted to the tongue of your trailer without some pretty extreme modification and fabrication. However there is still a…

It sounds like you are looking for a cargo carrier/tray to hold a Honda EU7000is Generator. If that is the case we do have a few options but none of the TorkLift Lock and Load SideKick Cargo Trays are large enough. Instead, I recommend the Flint Hill…

I called my contact at Camco about the replacement lid for a propane tank cover. The replacement lid, part #CAM40543 is designed to fit dual propane tank covers #CAM40523 or #CAM40542. These measure 20 inches long by 5 inches wide and includes the…

SumoSprings Custom Rear Axle Helper Springs #CSS-1168R are a good choice for your application since they will provide progressive resistance as the load on them increases, and unlike complex air bag systems these Sumo helper springs require zero…