Result: knobs

The knobs themselves are 2-1/4" in diameter and 1-1/2" tall. | how many inches are between the ladder rack knobs that screw into the deck rail. I want to know if my tool box can fit in between the rack when installed in a tundra...

Im looking for replacement knobs for a Rola Haul your might truck rack. Also wondering if knobs from another brand of rack might work. | Im looking for replacement knobs for a Rola Haul your might truck rack....

The box can then be placed as far forward in the truck bed which will butt it up against the forward-most ladder rack knobs. You could then have the bolt that the second set of knobs uses go through the sides of the box and thread on the knob from the inside of the box to hold the toolbox in place though this may require a longer bolt. |

We have a couple of other mounting options for the control knob that can go inside inserts in your dash. The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. |

Be sure to determine a location on the dash where you will be mounting the actual controller knob so the cable from the control knob can reach the control module mounting location under the dash. | Thanks...

The Rola rack uses four locking knobs on each upright to secure itself inside the rails on your truck. | does the sliding tracrack fit a 2017 tacoma ?does the rear rack slide forward? | I do have options for you but they do...

This brake controller has a super small control knob that you can hide in the dash instead of a brick to hit your knee on. | Do you have a brake controller compatible with a 2019 Lincoln Nautilus? | Hey Gary, For your 2019...

The main unit mounts out of site so only the control knob is visible in the cab. The knob controls the braking power and also acts as the manual override. | Do you have a 7 pin flat trailer wire harness for...

i have checked for power to the controller it has power i plug in the trailer the light is green i turn the knob fully clockwise light stays green i press the pedal still stays green i checked for signal on the red wire no signal i press the brake there is signal i pull the manual lever to the left the light turns red i hear the power at the brakes ,can you help me know why my light doesnt turn red when i turn the knob all the way to the right and press the pedal? |

Even when I apply the manual slide knob, the brakes will not lock up. Any ideas? | Hi, I have a 2005 Fleetwood Victory pop-up tent trailer. I recently had new brakes installed and ever since then, the trailer brakes are weak....

The main unit installs behind the dash so only the control knob is visible. The knob controls the brake power and also acts as the manual override. | Maam / Sir, I have a 1997 K3500 Crewcab Dually...

If you don't already have a brake controller then I recommend going with the Curt Spectrum # C51170 because it is a proportional brake controller that allows you to install it in a variety of locations and the control knob looks similar to other control knobs on your Frontier. |

The Tow-Pro Elite brake controller is pretty unique because it can be installed virtually anywhere and you only need access to the 3/4" diameter control knob. The control knob has LED lighting integrated into it that changes colors depending on what settings you have chosen. |

The knob controls the braking power and acts as the manual override. | I just bought a 2016 ford f 150. It came with a 4 pin plug. I pull many trailers and need to convert to 7 pin and have trailer braking and reverse lights....

The fourth picture at the Etrailer site RED44FR shows a trim piece for the controller knob. Does that trim piece actually come with the brake controller. | Im considering buying the Redarc Tow-Pro Elite brake controller for...

The controller is operated by a control knob that can be mounted anywhere within the driver's reach. | The brakes on my trailer suddenly stopped working. Being pulled with a 2016 Silverado 2500 HD with an integrated brake controller....

The main unit for this brake controller installs out of sight, with only the control knob visible. The control knob lets you adjust the braking power and also acts as the manual override. | I have a customer...

The main unit of this brake controller mounts out of sight, so it won't take up additional space in the cab. Only the control knob will be visible in the vehicle. The knob controls the brake power and also acts as the manual override. |

The base of the rack could be left on if you wanted to unbolt them from the feet but realistically it would be easier to just remove the feet all together since they install with knobs that don't require tools. | Ill be using...

When not connected to trailer, unit powers up correctly but when manual knob is activated the fuse blows. Every time. Blue wire disconnected, same thing. 12V on red wire when brake pedal depressed. | Tekonsha Primus IQ controller,...

You'll control the trailer brakes via a knob that can be mounted anywhere within the drivers reach. | I need a wire harness for my 2016 Honda Pilot , Must be a 7 pin and have the ability to add a break controller later on if...

As the factory bed length on your truck is 62", I recommend placing the ladder racks 50" or so apart from one another. The knobs located on the brackets inside the bed rail will loosen to reposition the racks then tighten back down once you have them in their desired location. |

I have no electric trailer brakes when stepping on pedal, I do have juice and brakes when sliding the manual knob. Everything was fine until a few days ago. it was wired by selling dealer when new, I did try to swap out controllers but still same problem. |

Once the Rola Haul-Your-Might T3 Truck Bed Ladder Rack # 59799 is installed in the bed of your Toyota Tundra it will be easy to remove by loosening the the 8 knobs, and sliding the racks out of your deck rail system. | I’m...