Result:

See thread below from a previous question. I have the Moryde 3000 equalizer and I see that the reccomended unit wont work. What are other options to correct this condition? | I do still have a few options for lifting the trailer but the Correct...

How many hanger extensions come with this? The picture and description says 8 but it seems to me that 12 are needed for a tandem axle trailer. | The Correct Track Trailer Alignment and Lift Kit - Tandem Axle # RR23QX does come with all of the...

I have a Jayco 2018 5th wheel with MORryde CRE3000 suspension. I am towing with a 2021 F250 4X4 Crewcab 6.9 Box with autoslide hitch I got from you. I need to raise my trailer by about 2 inches. I am confused with all the options, need help....

Are the moryde style wet bolts long enough to use with the correct track lift kit? | If you install the Correct Track Trailer Alignment and Lift Kit # RR23QX it will require longer bolts but MORryde makes a kit specifically for this. To find...

Why are some Spring Hangers for Correct Track longer than others? | The hangers will vary depending on the exact suspension set up from the manufacturer. With different spring combinations and number of axles used this will cause different parts...

I have a 2022 GMC Sierra 2500 4WD and a brand new Grand Design Reflection 150 Model 270BN fifth wheel with a BandW Companion hitch. I’ve only towed the fifth wheel one time from the dealer to the storage facility but the trailer sits high in...

It mentions buying an additional part to get the 2-1/4 lift in the highlights. What part is that? | Hey Richard, great question. To get the full 2-1/4" lift on a tandem axle setup, you actually need the triple axle kit part # RR55QX instead...

Hi, I am looking to get more height space between the tire and the wheel well out of my travel trailer, can i flip the shackles so they are opposite of the way they are now, to gain more room? All the videos and pictures show the shackles installed...

Whats the best option to raise rear of trailer? already has flipped axle or spring on top of springs was stock. My 5th wheel hitch is 17inch from floor of bed its a Curt 20K slider and is already at lowest setting. Buy a lower hitch ? Which...

Jameson, What clearance issue arises for this with the CRE3000 kit? I am only interested in lifting my trailer and not shifting the alignment. | Hey Brian, I believe you are asking about the Correct Track lift kit part # RR23QX and why it can't...

Lifting a 2020 Grand Design 260RD Fifth Wheel Trailer Hello, I am confused as to what product to purchase in order to get another 2 inch of lift on my trailer so that I can level it out with my new GMC 2500. | Thanks for reaching out! To lift...

Do you have a straight stake pocket that fits a 2x4 without cutting the wood? I replace my stakes regularly and dont have the time to taper to fit. | I do have an option for you but the Rack'em Heavy Duty Stake Pocket for Flatbed Truck or Trailer...

HI there, I have a 2024 Keystone Montana High Country 295rl, I can not find the pin box number. It appears to be the Lippert Trail-air Road Armor which may now be Curt Roto-Flex with the 1116 bolt pattern, two rows of three bolts on each side...

Will this be able to handle an empty 18 foot 10000 lbs rated trailer? It weighs approximately 2500-2900 lbs and has a 500 lbs tongue | Technically if your trailer has a tongue weight (TW) of 500 lbs then it falls into the 500 lb max TW rating...

I have a 2025 keystone Coleman 17b. I’d like to lift it a couple inches as it scrapes going into and out of my driveway. What Kit would you recommend? | Hi Justin; do the leaf springs run under your axle (underslung) or are they sitting on top...

Hi, I have a 2021 Ford F250 4x4 stock truck, no lift and tow a 2021 Grand Design Reflection 278bh. I tow with an Anderson hitch on the lowest sitting and the 5th wheel camper still sits nose high. The axels are already flipped, so I need a...

Hello, I have lippert 8K axles in tandem and need to raise the height of the trailer. On certain roads/driveways with a buckle on the ascent/decent, I am dragging the rear end of our 30foot trailer when having to back down an inclined dirt driveway....

Can this rack be modify to set lower on the roof? Height is a factor for me. | The Rackem Fitz-All Enclosed Trailer Ladder Rack # RA-28 does adjust horizontally to allow it to fit trailer roofs from 4-feet to 8-1/2-feet wide but its height is...

Bought this kit to use with ezy flex dexter kit that comes with bronze bushings problem is wet bolts wont be long enough need help | Hey Jerry, we do have one wet bolt that is long enough to be used with the Correct Track lift kits part # RR23QX...

What rack available is best suited for this type trailer 2002 wells cargo trailer utility body 6x10 with fiberglass nose cone rack for hauling ladders and lumber | We have a couple options that will work for your Wells Cargo trailer. The...

I have a 2023 KZ travel trailer...seems that the manufacturer made a mistake with parts or design end result is trailer bottoms out as there is only About 2 of travel before it..Its a BAE frame as is well made as far as hangers so I not wanting...

has Lippert discontinued the Correct Track kits? | Yes, they have Dan. The alternative to the Lippert Correct Track is the Correct Track Trailer Alignment and Lift Kit item # RR23QX and item # RR55QX. These kits include brackets that attach...

I have 7k axles on my 5th wheel. I would like to install 8k 7 leaf springs to give me more height when coupled to my lifted Ram. I really dont want to replace the hangers. Would this give me an inch or so of lift? Greg | Hi Greg; leaf springs...

I am installing this on a tandem 5th wheel. Installation looks pretty straight forward but I am wondering about the best sequence for the bracket installation. Should I start at the equalizer bracket and then move to the forward and rear spring...