Result: Tail Light plug

will have the tail light signal on it. If all of these functions are correct and test out with the brakes | I have the 118408 converter connected to my 2008 jeep commander i everything works fine at the plug,...

For your 2008 Jeep Commander, the Hopkins Custom Tail Light Wiring Kit for Towed Vehicles, part | looking for a plug into factory harness tow behind for the lights on a 2008 Jeep Commander to be towed behind...

that attaches at tail light | we purchase hitch and wiring harness for our 2010 jeep commander. everything went perfect with install but the lights wont work. The vehicle was not equiped with a factory tow...

I noticed that my right turn signal and rt tail light is dim on the trailer. I wanted | I noticed that my right turn signal and rt tail light is dim on the trailer. I wanted to troubleshoot a bit further and...

light circuit behind one of the vehicle tail lights to activate your electric lockout for your surge | My Boat Trailer has a 5 pin flat plug , which kit would give me that connection? Thanks...

behind the driver and passenger side tail lights to provide you with a 4-Way connector to power a trailer | I have a Rocky Mountain Edition. The tow harness says it fits all except that, why? Do you know what...

. The Plug-In location is behind the driver and passenger side tail lights. I have the complete install video | I have a 2007 jeep commander Rocky mountain and I need install trailer wiring...

. When i plug in the whip from the truck to the last portion trailer I have no lights. I cut | I have a 2006 Jeep Commander with a 7pole with a 4 pole on the side on my jeep. Lights were working last year but...

into the driver side tail light compartment. No paint was removed and I dont know if the material the body is made | 2006 Jeep Commander I bought my Jeep a few years ago from a dealership and they installed...

. This brake controller works off of the tail lights going to your trailer to determine when the brakes | I have a 2006 Newmar Dutch star with air brakes .I want to pull a enclosed trailer will Part C51180...

and it simply plugs into your Jeep's 4-way to power the trailer's lights. | I am planning on renting and towing a jet ski trailer and Im curious if the trailers lights connector will be compatible with and...

was factory installed Jeep will have ran a light green brake output wire which you should find coiled up | The 2008 Jeep Commander doesnt have the plug under the dash for a plug and play brake controller installation, so youll...

lights on the trailer you can just cap the line. Since there is no plug and play for the brake | I have a 2007 jeep commander and I want to install a brake controller. I have a flat 5 pin under the rear bumper....

the harness from the rear lites plug and go on both sides to the back of my seven pin . | I only have lites on my rt side at my factory installed towing package .Im looking to replace the harness from the rear lites plug and...

so I doubt that is the issue (since a 4-Way just plugs in to the adapter part to provide the light | Hi, I put all the purchased equipmnet in. Also brought a brake controller and a new male plug from the trailor...

circuits on the trailer. On the trailer, the left and right turn signals also have the brake light | Vehicle has five wires, White red yellow green and brown, I know the function of each wire. Just not sure which wire on the...

I used the t-one wiring harness on my 2008 jeep commander and have no running lights on my boat | I used the t-one wiring harness on my 2008 jeep commander and have no running lights on my boat trailor although when I switch...

for a coiled up light blue or light green wire located near the firewall behind the emergency brake near | Just purchased a 2008 Jeep Commander. Do not know where to plug in the brake controller? Does it have...

for a coiled up light green wire. The controller itself would wire to the vehicle using our # 5506 installation | WIll the plug and play TK93VR work on a 2008 Jeep Commander? | The 2008 Jeep Commander doesn't have the plug...

. This harness connects to your factory wiring behind each of your tail lights. If your pop-up camper has | HI, Im looking on buying a colman pop up camper, and i need a hitch for my 2008 Jeep commander,...

pro. How do I identify ground, brake output, stop light circuit, and 12v in the Jeep side | I have a 2010 Jeep Commander 5.7L and a 21foot expandable trailer. Will the Redarc Tow Pro elite work and if so, what additional pieces...

into the passenger compartment, look for a coiled up blue or light green bare-ended wire near the top of the e-brake | please help, cant navigate the site to find what Im looking for. I have a Tekonsha P3 brake controller and...

-flat and 7-way combo. Keep in mind this will only be for brake lights, taillights and turn signals | Tim Anderson 320-226-5570 Looking to add wiring harness for a 2008 jeep commander without factory tow package I know I need...

the trailer lights. Most small trailer use a 4-Pole connector. We have a plug and play harness, part # 118408 | Jeep Commander 07, Canada Trailer hitch install. What will I need to take a bare jeep to towing...