Trailer Wiring Kit For 2007 Jeep Commander Rocky Mountain  

Question:

Expert Reply:

The T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118408 is the correct harness for the 2007 Jeep Commander Rocky Mountain.The purpose of this item is to control and allow the basic hookup of the three lighting functions (running, turn, and brake lights) plus one pin is provided for a ground wire. The Plug-In location is behind the driver and passenger side tail lights. I have the complete install video attached.

If your trailer has electric brakes, the Universal Installation Kit for Trailer Brake Controller 7-Way # ETBC7 will work with your Rocky Mountain. This kit includes everything you need to install an electric trailer brake controller and 7-way connector.

Before installing the # ETBC7 you first need to install the 4-way trailer connector # 118408.

For a brake controller the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 is one of our most popular items. This proportional brake controller will activate your trailer brakes in a proportion to your vehicle's braking action. It'll automatically adjust your trailer's braking based on the deceleration of the tow vehicle and it activates immediately so there's no pausing like with your time delay brake controllers. It does have an automatic leveling ability because there's an internal sensor on the inside which will detect deceleration even if the controller is not mounted flat.

The etrailer.com Ball Mount Kit for 2" Hitches - 7,500 lbs # 989900 is a excellent product to consider. It includes two ball mounts, two hitch balls and pin & clips. If your hitch or trailer has a different towing capacity, if you contact me back, I can make tailored recommendations according to those specifications.

expert reply by: Timothy G

0