Result: hardware

Hi Chandler! I see you already placed an order, but I still wanted to get you an answer to your question. The Equal-i-zer Weight Dist Shank - 12" Long - 7" Rise, 3" Drop - 600 to 1,400 lbs TW #EQ90-02-4100 is for a 2" hitch. The…

There sure is K.C.. For a shorter weight distribution shank that fits a 2-1/2" hitch, I recommend the Equal-i-zer item #EQ90-02-4700. This shank measures 12" long x 9-1/2" tall. It provides up to a 3" drop and has a 16,000 lbs…

Hey Jack! You can use the Kodiak Disc Brakes #KOD67FR as a replacement as long as you have a #84 spindle on that trailer. These use #L68149 inner and #L44649 outer bearings so you need to make sure that matches what you have now. If you aren't…

Hey Mike! Caliber Marine Slides #CA26AJ can handle the weight of your boat. However, for your 25' Pro-Line I recommend using the 3" wide Caliber Marine Slides #CA66AJ instead. With a 5,000 lb fiberglass boat, the wider slide is the better…

Thanks for letting us help Keith. For the Equal-i-zer Weight Distribution Shank for 2-1/2" Hitches #FA88FR, the distance from the top of the receiver shank to the top of the vertical mounting shank is 7" when installed in the rise position.…

Welcome back Joseph! What you are looking at for your 2019 nuCamp T@G trailer is the following part: Terran Industries Electric Trailer Brakes - Self-Adjusting - 10" - Left/Right Hand - 3.5K #TX97ZJ The 10" brakes you have means you have a…

Hey Linda, we have just what you are looking for with the weight distribution shank part #FA78FR. This fits a 2-1/2 inch hitch without an adapter and can do up to a 7 inch rise like you need. This means you wouldn't have to use a sleeve adapter…

Hello Lewis, Thanks for writing in! I'm glad you found us, and thanks for getting back to me with the trailer weight. Since your trailer is around 15,000 lbs, the 10K option I originally recommended is not going to work for your setup. I was able…

Hey Jason! I'm guessing you have the 12" long shank right now which is the standard. For a longer shank that fits a 2-1/2" receiver you can use the Equal-i-zer Weight Dist Shank - 2-1/2" Hitch - 16" Long - 7" Rise,…

Welcome back Belinda! The Andersen Weight Distribution Hitch w Sway Control - 4" Drop/Rise - 16K GTW, 1.6K TW #AN33VR may work for towing your Grand Design Imagine XLS23LDE with your F-250. However, when we tested it a while back, we didn't…

Hey Jeff, welcome back! The Equal-i-zer Weight Dist Shank item #FA88FR has the standard 1-1/4" bolt hole spacing. The holes are 3/4" in diameter. This shank is compatible with almost every weight distribution system on the market with the…

Hello Danny, Does that mean that your trailer is bigger than all the others, just like everything else in Texas..... bad joke, I know. I have not heard of any issues with the Texas Pride and not being able to use the Demco eZ-Latch Gooseneck Coupler…