Is There Frame Drilling Required to Install Draw Tite Hitch # DT38KV
Does this hitch require drilling in the frame? | Hey Miks, there's no frame drilling required to install the Draw Tite hitch part # DT38KV. There is some trimming of the rear fascia but nothing too crazy at all. What are you planning on using...
Is 2024 Honda Prologue Limited to Listed 150 lb Tongue Weight with Draw-Tite Hitch Installed?
Hi - looking at the Drawtite hitch for the Honda Prologue, the tongue weight limit is 350lb. Looking at the honda prologue specifications, it states a tongue weight limit of 150lb. Do you know if the lower limit on the Honda spec is a limit...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Does the Draw-Tite Max-Frame Trailer Hitch Interfere W/ Foot Sensors On a 2024 Honda Prologue
Does this block the foot sensors for the power rear liftgate operation? | Jon, our techs have not reported any issues with that feature so the Draw-Tite Max-Frame # DT38KV won't interfere. If by any chance they don't work traditionally, we've...
Does Draw Tite Hitch that Fits 2024 Honda Prologue Have Better Ground Clearance Than OEM
Is there any information about how this hitch compares to the OEM hitch sold by Honda? Specifically, I’m wondering if there is a difference in heights from the ground between the two and if the rear trim piece sold by Honda would be compatible...
Will the Curt Hitch C89RV Block the Liftgate Sensor on a 2024 Honda Prologue?
Hello, I’m looking to install a hitch on my 2024 Honda Prologue. I have the Touring model. I have a question about C89RV. Does it interfere with the kick tailgate open function the vehicle has? Also, can you provide installation instructions?...
Recommended 4-Way Wiring Harness for a 2025 Honda Prologue
I have a 2025 Honda prologue. It does not have a factory wiring harness. I’d like to add a flat 4 wiring harness for the trailer lights. Can you give me the exact part number? I’m looking for from your site. Thank you. | Hey Tracy. The Curt...
Do All Hitches for 2024 Honda Prologue Require Frame Hole Enlargement
Hello. I Hope you can help me. I’m looking to lease a 2024 Honda prologue and I need to install a trailer hitch to carry my mountain bike. I can drill into frame under lease. I read some of the comments and it appears the tie down holes need...
Will The DT38KV Interfere With Kick Sensor On 2024 Honda Prologue?
I have a 2024 Honda Prologue Elite. I purchased the Draw Tite hitch model DT38KV. I have read the instructions and I do understand I have to trim an under carriage panel. My question is have you guys run into an issue with the tailgate sensor...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Does Draw Tite Hitch DT38KV Stick Out Past Rear Bumper
After installation, what is the clearance under the hitch? Does it stick out past the bumper at all? Would mostly be using it for a bike rack and an occasional flat trailer for Home Depot runs. Not a deal breaker at all, but does it block...
Can a 3-Wire to 2-Wire Trailer Wiring Harness Converter be Bypassed
can i by-pass a 3 to 2 wire taillight converter in any way | The only way to bypass a 3-wire to 2-wire trailer wiring harness converter (assuming your vehicle has a 3-wire or separate tail light system) would be to convert your trailer to a...
Replacement Jack For 2001 Stratos Bass Boat Trailer
I have a 2001 Stratos Bass boat with a Fulton center bolt swivel jack onto a welded plate on the trailer. I would like to upgrade to the Fulton F2. My holes on the plate are 3X3 on center. Will the F2 work? Can I send you picture? Thank You...
Does The GE Appliances RV Refrigerator GE58FR Come With A Mounting Bracket?
Does this with mounting brackets? | Hello Raymond, thanks for reaching out. The mounting brackets are not included with the GE Appliances RV Refrigerator # GE58FR. It requires a GE approved top bracket part BMT-GPV10. This is not something we...
Where is Connector Found on 2001 Isuzu Rodeo for Installing Hopkins Trailer Wiring Kit HM43215
I cannot see the plug you guys talk about in the jack compartment, however there is a similar plug on the bottom beside the spare tire is that the correct plug, and do I have to do any other connections? | The plug you have found is the correct...
Installation Instructions for Wiring a 2008 Volkswagen Rabbit to Tow a Trailer
My question is about the electical hook-up. Can I splice a 4-flat connector directly into the wiring harness, or do I need some kind of powered module dure to the fact that it6 haqs LED lights? | Due to the MX (Multi-Plexed) wiring system on...
What is the Battery Life for Hopkins Wireless Magnetic Tow Lights
What is range of battery life for these lights? The check battery level indicator light every 2 hours statement has me concerned. I drive for much longer stretches than that and dont wish to carry excessive spare AAs or replace them every couple...
Why is a Stabilizing Strap Recommended on Curt Hitches and what is Meant by Non-Trailer Load
What is meant by stabilizing straps for non-trailer loads? | Non-trailer loads are hitch accessories like bike racks and cargo carriers. Basically anything that is not a trailer that you could put on a hitch. Curt recommends you use a Curt Trailer...
4-Way Trailer Wiring Recommendation for 2002 Isuzu Rodeo
HI first Id like to thank you for you time to answer my question. Ok I have a 2002 Isuzu Rodeo and I want to install a 4way trailer conception. But I only see a connecter with 2 wires one hot and on ground I believe they are the running lights...
Trailer hitch for a 2004 Isuzu Rodeo with 3.5 Liter Engine
my is 2004 rodeo 3.5 liters wish i will use | The only trailer hitch that will fit the 2004 Isuzu Rodeo with 3.5 liter motor is Curt hitch # C13235. But in order for this hitch to fit your Rodeo must have the rear door mounted spare tire. It...
Is There a Difference Between Brake Assembly Part # AKFBBRK-35-D, AKFBBRK-35R-D and # AKFBBRK-35L-D
Can you explain the differences between? AKFBBRK-35-D AKFBBRK-35R-D AKFBBRK-35L-D They appear to be all the same assemble just separate or in the pair, am I correct? | You are correct. We sell the assemblies as a pair as part # AKFBBRK-35-D...
Trailer Hitch Options for a 2004 Isuzu Rodeo with Spare Tire Mounted Underneath
Can I install a trailer hitch with the spare tire mounted underneath on this model. It is a 2 wheel drive. | Yes, there are trailer hitches available for the 2004 Isuzu Rodeo that have the spare tire mounted underneath the vehicle. I have included...
Hitch and Bike Rack Recommendation for a 2000 Isuzu Rodeo
This rack is recommended by your site for the 2000 Isuzu Rodeo, My vehicle has a small spoiler above the back window and cargo rails on top. The spare tire is mounted below the vehicle. We purchased a new mens Diamondback Edgewood and womans...
Is Trimming of the Foam Absorber Required for the Curt Hitch On a 2010 Mini Cooper Convertible
have a question about hitch and hard form . I removed the bumper today for preparation for hitch installation. The bumper has the hard foam but it is wedge between the front and back metal bumper with a full metal back hard foam cannot be...
Filter Your Search
Contact and Help