Result: knobs

Id like to replace my fan switch, but when I bought my 94 Roadtrek RV, the fan was missing knobs. Do you sell knobs to fit the FVK1031-05 fan switch? | Id like to replace my fan switch, but when I bought...

This kit comes with two knobs and two hooks like you mentioned wanting. | I need a set of replacement hard ware for the 2500 . The hooks and knobs. 2 sets if possible. Thanks | The replacement hardware kit you need for the Longview...

Blue Ox BRK2012 - Do you carry the following parts: - Black plastic push pad - Knobs for the gain controls Thanks. | Blue Ox BRK2012 - Do you carry the following parts: - Black plastic push pad - Knobs for the gain controls Thanks....

If you're ok with losing your 12 volt outlet by your shifter you can use the Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-003 to install the knob. | I have been a long...

Yes the Replacement Manual Lift Knob # FVK1142-09 does fit the Fan-Tastic roof vent LF5000RBT that you have. | Can you tell me if your part #FVK1142-09 works as a replacement for my FANTASTIC fan model LF5000RBT? Looks like...

Including the Ford Style dash for the control knob. Thanks in advance. | I am interested on installing this controller on my 2020 Ford Ranger with factory tow package 7 pin. If I order this item, are there other parts I need...

If you check out the attached video of this controller being installed on a 2014 Jeep Grand Cherokee you can see that the control knob is actually mounted in the center console. Since the control knob doesn't have to be mounted in a specific orientation it really opens up the possibilities for installation. |

From there you can use the knob to fine tune it. Below are some pictures of how people have mounted the knob and a link to an install video for a 2021 Range. | 2025 ford ranger no tow package. XL trim, spray...

According to Titan, the # T2343400183 knob-latch type coupler should be tightened until it can no longer be turned by hand, then backed off to the previous notch. | I would like to know the recommended tightness for the Titan...

I have been looking at Redarc and Curt Spectrum Trailer Brake Controller - Dash Mounted Knob - Up to 4 Axles - Proportional - thank you | what brake controllers best fit a 2021 Ford Ranger Lariat with a factory tow package?...

You will then be able to turn the controller knob fully counter-clockwise, press the brake pedal, double click the brake knob twice within 1 second and then release the brake pedal this will change the light from blue to green. |

Compared to the LaSalle Bristol Utopia RV Kitchen Faucet - Dual Knob Handle # 34420380R143ABX that features similar specs, but has a 8" on center mount. | Hi, I am looking to replace the faucet from a 2001 Roadtrek, model dodge...

The main unit can be mounted in any position, and the control knob mounts in the dash of your vehicle. The knob uses a colored LED for diagnostics and works as a manual override when pressed. | I was looking...

This brake controller allows you to mount the main unit out of sight with the knob mounted in the dash. The knob allows for quick and easy adjustment and also functions as a manual override. | Can I use the...

The Universal Mounting Panel for Redarc Tow-Pro Trailer Brake Controller Control Knob item # 331-TPSI-001 which measures 1-1/4 by 1 inch. | hello im trying to install trailer hitch and trailer brake controller on a 2010 ford...

In the video you can see David easily completes the installation with the most difficult part being when he pops the 12v outlet out to replace it with the knob for the controller so that he doesn't have to drill a new hole in the dash to install the knob. |

I see that the Redarc has a separate adjustment knob that you mount wherever desired. The knob then plugs into the control box and the Ranger factory wiring gets spliced into a 4-wire pigtail that then plugs into the controller to complete the installation. |

I've included a picture below showing what the knob looks like once installed. What kind of trailer are you planning to tow? | Good morning I am trying to upfit my 2003 E350 super duty with a trailer braking system. I want...

Didn’t know which Custom harness dash knob I would need. Thank you. | I have a 2024 Ford Ranger XLT with tow package. What do I need to order for this to be a plug n play install, also I would like the button to be mounted...

Adjust the feet to fit your mirror housing and then twist the tightening knob. Please note the attached product review and installation videos. | Do these sideview mirrors extensions fit well on the 2021 Ford Ranger? | The...

The panel which houses the light and control knob I would say is around 1/4" - 1/2" thick so that is all that would sit inside the trailer. | Does the bottom of this fan extend into the living quarters? If so, how much? | The...

These are the replacement hooks and knobs for Custom Towing Mirror # CTM2500, which you referenced. | Regarding: Product Code CTM2500. I purchased these mirror extensions for my van and love them but have lost the plastic clip...

The knob adjusts the braking power and also acts as the manual override. | I need everything to tow a trailer with brakes with my 2021 Ford Ranger, hitch, wiring, ball, brake controller. What should I get for this? Can you...

To install the Redarc Tow Pro Elite part # RED44FR in your 2004 Ford E-250 all you need is the install harness part # RED87FR which plugs into a port under the dash. Basically the knob gets mounted on the dash in an accessible location and then the module would get mounted out of the way. |