Result:

23 ford ranger tremor with trailer kit. I cant find the ARC controller for it. All you have is controller without trailer package. I found an install video on YouTube from your site. Installing it on a Ford. Ranger, and it had install it in...

I have a Tekonsha Prodigy P3 Trailer Brake Controller that I had installed in a Jeep Cherokee. I just got a 2023 Ford Ranger and would like to install the brake controller in it. I kept the Cherokee wiring and can cut of the vehicle end for...

Is part number 3034-p the same as Tekonsha 22292? I’m looking for a connector to Prodigy P2 for a 2024 Ford Ranger. Both these plug ends look like they would fit into the plug under my dash behind the OBD port. I REALLY do not want to cause...

I have a Tekonsha Primus IQ P2 that I removed from my previous vehicle. I would like to use this in my Ford Ranger 2023, is that valid? I need the mounting bracket and all wires necessary to go to a seven blade connector for the trailer I pull....

i need to know what is the difference between these products? C56431 22124 | Clive, realistically there is no difference between the Curt T-Connector # C56431 and the Tekonsha T-One # 22124. The only real difference is one is made by Tekonsha...

Hello. I have a 2018 Ford Explorer Limited. Currently, my trailer brake controller is a Hopkins Insight 47297. I am in the process of getting a new vehicle, which is a 2021 Ford Ranger. Will the Hopkins Insight brake controller work for...

where on the ford 2019 ranger can you install the control botton | We have not yet (as of April 2019) had a chance to install any wired trailer brake controllers on a 2019 Ford Ranger so for guidance I checked with my most trusted brake controller...

I have a 2020 ranger 4x4 xlt. Its wired for a brake controller. I need one with pigtail to pull a 3000 lb camper. I have had the prodigy 2 on other trucks. What do u recommend. Thanks | Hey Bob, thanks for reaching out! I personally...

90195. - will it fit 2019 Ford ranger | Yes, the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 will fit and work perfectly on your 2019 Ford Ranger. There is not a factory plug-in port beneath the dash of your Ranger for a brake controller...

I have a trailer with a Tekonsha RF Prodigy controller. I do not have a remote controller. I bought the trailer used. I cannot find a model number on the controller. I see FCC ID TFB-FREESTART and what looks like a serial number TM00047063. Also...

What do I need to get 7 Way for my 2010 Ford Ranger Sport. I dont even know if its already exiting 7 way? Am looking at kit Reese # 74682. Thanks | The Reese Multi-Tow 7-Way & 4 Pole Trailer Connector # 74682 is meant to be a replacement for...

What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...

Where do i find brake control wires on a 24 ranger? | Hi Dennis; you will find the wires for brake controller installation up under the dash. For whatever reason they still don't add a custom plug for plug and play installation. You can see...

I searched your website for a trailer brake controller for a 2024 Ford Ranger. The search results is a Tekonsha Prodigy P3. The photos show loose wires no plug from a 2021 Ranger. On your webpage, those wires get butt-joined and heat shrunk...

Hello, I just bought a Tekonsha P3 controller with the 3036-P harness from Tekonsha for my 2024 Ford Ranger. Your site indicates that this harness will not fit my truck, but online research indicates that it should fit up perfectly comparing...

I have a Tekonsha Prodigy brake controller that I purchased back in 2005 or 2006 that has always operated very satisfactorily. However recently someone driving my vehicle broke off the manual lever. I noticed that the pilot light that comes...

I have tried to find which harness I need for my 2004 Ford Ranger, Edge, RWD, 3.0 which has a tow package and a 4 pin connector. I will be pulling a trailer that has a 7 pin oval connector, but your directions on your website are very confusing....

I am about to order a 2024 Ford Ranger to tow our 2017 25’ Airstream Flying Cloud FB and had an “XL” model priced out with the bare bones tow package hitch, 7-pin wiring that does NOT include the integrated Ford brake controller or their “we’ll...

I have the Curt 7 pin harness In my cart for my 2019 ranger, but am having a problem locating the correct plug in adapter to install my tekonsha brake controller on that same 2019 ranger. Please advise on the part number required for plug and...

2019 Ford Ranger with tow package. Do I require a brake controller and the 7 pin trailer connector? Or will the 7 pin connector be enough? My rv does have powered brakes. | Hey John, in order to activate your trailer brakes you will need...

I have small rear camera mounted to the top of the license plate. I also have a flat 4-pin trailer connector that I would like to get power to the camera. How do I do that? I was thinking that I could use a compatible connector and only...

Hello, I have 2024 Ford Ranger Raptor and was wondering if this would fit since i have the raptor? Part RAS29VR. Was also wondering if they have air bags instead. I have a trailer that’s 4,500 pounds that i haul and I’m looking to get more stability...

Is there anything special about manually adjusting self adjusting trailer brakes? I notice there are 2 little openings in rear of backing plate. One has the wheel. What’s the other opening for? Do I have to move the self adjuster out of the...

Do I need a wiring harness to install a trailer brake controller on my 2024 Ford Ranger with the factory tow package? | On brake controllers like the Tekonsha Prodigy P3 Trailer Brake Controller # 90195 it will come with a pigtail needed to...