Result: inline fuse holder

Hey John, welcome back! The closest match to your Flojet 03526144 is actually the Lippert Flow Max RV Water Pump #LC689052. Your Flojet is rated for 12V, 2.9 GPM, and 50 psi, while the Flow Max is 12V, 3 GPM, and 50 psi. However, the Seaflo #SE57FR…

Welcome back Linda and thanks for the pic! Unfortunately, the SnapPad SnapJack item #SN44VR are not going to work with your BAL Type C stabilizing jacks because the mounting tabs are too narrow. The SnapPad item #SN39FR are the only options to add…

Hey Tim welcome back! Your ARH15AACBL2 GE AC unit has the old 410a refrigerant in it so the GE Appliances item #GE64FR you were looking at isn't going to work as a replacement. The EPA mandated R32 refrigerant has been used in all new AC's…

Hey, Kevin. Thanks for another question! On the Progressive Dynamics 4000 series part #PD4060K, the jumper being referenced in the installation instructions is the metal link between the two positive DC lugs. That jumper ties the two positive lugs…

Hey Andrew, the Demco Stay-IN-Play Duo is an excellent choice for the 2026 Bronco and includes the breakaway switch and cable, so no additional breakaway kit is needed. With that said Ford's current flat-towing instructions for the 2026 Bronco…

Thanks for the picture Don! I do not have anything that connects to that 10-pin so I am hoping you're just at the wrong connector. I have linked a picture below along with an installation video that will show you what the Hopkins item #31345…

Hi David; this is pretty common and all you really need is to throw in some simple diodes #RM-690. These will only allow power to flow in one direction so it will stop any backfeeding and power drain. It sounds like everything is in-line so you can…

Yes, the Replacement Converter for Parallax/Magnetek or WFCO RV Power Centers - 55 Amp, #PD4655V is what you are looking for. This upgrades or replaces the converter section for 55-amp Parallax/Magnetek, WFCO, or Parallax RV power centers and works…

To convert the WFCO WF-8955PEC to be lithium compatible you'd need the part #PD4655V and you'd be set. This fits in the panel without any modifications.

Yes, it will! The Parallax/Magnetek or WFCO RV Power Centers #PD4655V will work with Lithium batteries like the Lifepo you mentioned, flooded lead acid, AGM, and gel batteries.

Hey James, yes the Dometic FreshJet part #DMC39ZR will allow you to use the same controls and panel as your current Dometic Brisk I.

You will need the Stop Light Switch Kit #RM-751449 for your 2019 Jeep Grand Cherokee. This will provide you with a brake signal as the factory brake switch wiring is very thin and not recommended for splicing into. This switch includes a custom fit…