Videos
for Search Results
Help Articles
for Search Results
Expert Answers
for Search Results
Cost and finish. The Curt item #C13416 and the etrailer Hitch item #e23ZR are both manufactured by Curt to the same specifications and capacities. The etrailer item #e23ZR is our house brand hitch and my personal preference due to the flat matte…
view full answer...Hello Al. The Scissor Stabilizer Jack #TJSC-24 has a retracted height of 5". Meaning if the current jacks are at 5-3/4" you will gain 3/4" of clearance. if you are looking to gain as much clearance as possible, I suggest…
view full answer...Yes, a trailer that is nose up can cause big problems. A level trailer is ideal and worth working toward for safety. The good news is that you can get the trailer almost exactly level with switching ball mounts. This is where an adjustable ball…
view full answer...The Curt Trailer Hitch Receiver part #C13416 which is a fit for your 2019 Toyota RAV4 does come with all the hardware that you will need for instillation. I have attached an install photo of the trailer hitch for you as well. I also recommend you use…
view full answer...When using the Furrion Chill AC Unit part #FR86PR like you are wanting in place of a Coleman Mach setup you'll need to also use the Coleman Wiring Conversion Kit for Furrion Chill Rooftop Air Conditioner Unit #C-FACR15SA-A01 to make the…
view full answer...The recommended clearance with leaf spring suspension on an unloaded trailer is between 2 - 2-1/2 inches. You should have sufficient clearance with your loaded trailer, as leaf springs only tend to deflect 1-1/2 inch when carrying a load.
view full answer...When you measure for a ballmount, you will want to measure from the ground up to the flat bottom part of your coupler, not inside of it. The 2-3/4 inch rise provided by the recommended ball mount would work just fine for you. That part number has…
view full answer...For the greatest amount of ground clearance, you'd want to use the Curt Class III #C64NR which would provide approximately 12-1/4 inches of ground clearance under the hitch receiver tube. This hitch also has the advantage of being the least…
view full answer...We have just what you are looking for. I called my contact at TDE and asked about the hub you have on your boat trailer. They told me that it was a 5-stud idler hub for a 3,500-lb axle. That means you need the part #AKIHUB-545-35-K. This is a fit for…
view full answer...Weight distribution shanks are pretty interchangeable between different brand systems but I do recommend taking a couple measurements on the existing shank for your Eaz Lift system just to be sure. We don't currently carry Eaz Lift products so…
view full answer...When we installed the Curt Trailer Hitch Receiver #C94WR on a 2022 Hyundai Tucson we found it to have a hitch height of 17" to the inside top of the receiver. This will put you at 14-1/2" of ground clearance to the bottom of the receiver.…
view full answer...Hey Darin, so the Roadmaster Nighthawk tow bar part #RM-676 is a really great tow bar that will work great for you so what you would need is the correct Roadmaster direct connect style base plate kit to use with it. If you have the standard bumper…
view full answer...Filter Your Search
Contact and Help