Setting up the Curt Trailer Hitch Receiver on a 2023 Toyota RAV4 Video

The main difference between the Curt Trailer Hitch Receiver part #C13416 and the EcoHitch Hidden Trailer Hitch Receiver part #EH97FR is that the EcoHitch has a completely hidden cross tube whereas the Curt cross tube will be visible from the rear of…

According to Curt's fitment guide the Curt Trailer Hitch Receiver #C13416 is compatible with all models of the 2024 Toyota RAV4. If you plan on installing this hitch yourself then I highly recommend watching John's install video below to help…

Hey David, we have just what you are looking for with the Yakima Outpost HD Overland roof rack solutions like the part #Y01152-5855 which fits the t-slots of the Bak Rvolver X4TS #BAK93AV that you referenced.

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Steve, We have the perfect hitch for your 2024 Toyota RAV4 hybrid, which is the etrailer Trailer Hitch Receiver #e23ZR. This hitch does not require any trimming of our bumper fascia at all, it just bolts right on up to your trailer frame and…

To add a hitch to your 2024 Toyota RAV4, I recommend the etrailer item #e23ZR. This hitch is custom fit and bolts to your Toyota with included hardware. This is a class III hitch with a 2" receiver. It has a 4,000 lbs towing capacity, and a 600…

Cost and finish. The Curt item #C13416 and the etrailer Hitch item #e23ZR are both manufactured by Curt to the same specifications and capacities. The etrailer item #e23ZR is our house brand hitch and my personal preference due to the flat matte…

Hi Jeremy; any hitch with a receiver hanging down will interfere with the sensor on your 2024 RAV4. However, in most cases it still works when you place your foot on either side of the receiver. If your main concern is retaining full sensor…

Hi Dan, There is a 4-way wiring harness for your 2025 Buick Enclave to go with the Curt Trailer Hitch Receiver #C97RV. The correct fit for that is the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector #C66RV.

It sounds like you have the Curt Trailer Hitch Receiver #C13416 installed on your 2020 Toyota RAV-4. The Curt #C13416 has a maximum tongue weight rating of 600lbs, which is enough to support the etrailer Motorcycle Carrier W/ Ramp #e98873 you are…

Hi Thomas, yes the etrailer Hitch Receiver Lock #e98881 will work great with the Curt Trailer Hitch Receiver #C13416 which will also fit your 2024 Toyota RAV4 Hybrid.

The most concealed hitch receiver is going to be made by EcoHitch and the one that fits your 2021 Toyota RAV4 Hybrid is the EcoHitch Hidden Trailer Hitch Receiver item #EH97FR. The crosstube is completely hidden and the only part you see is the…