Will Curt Trailer Hitch Receiver Fit 2025 Ford Mustang GT With Active Valve Exhaust
Will a Curt C45RJ hitch fit a 2025 Mustang GT with active valve exhaust? If not, do you offer another Class 1 hitch that will fit? | Hi Doug; the Curt Trailer Hitch Receiver # C45RJ is a pre-order item. Since it hasn't been fully developed...
2018 Mustang GT Trailer Hitch Recommendation
I just returned from my local garage where they tried to install a Curt 11405 only wifes new 2018 Mustang GT. The Curt 11405 was originally on her 2015 Mustang ecoboost. The hitch does not fit the 2018 GT because the mufflers interfere with...
Curt Wireless vs Prodigy Wireless for Motorhome Towing
I need a trailer brake controller for my 22foot enclosed trailer. I was thinking of going wireless so I wouldnt need to access the MH wiring to install. What is your recommendation. | Performance-wise the Prodigy RF part # TK94FR and the Curt...
Best Trailer Hitch For 2025 Ford Mustang Ecoboost
I need a trailer hitch for a 2025 Ford Mustang Ecoboost. A class 1 1.25 hitch would do. You show a Curt hitch available in September. What are the odds of this happening in that time frame ? | Hello Denis, thanks for reaching out. The correct...
Trailer Hitch, Wiring and Ball Mount for 2017 Ford Mustang
10” rise from 1 1/4 to 2” I don’t need dual. Just small to large with 9 or 10” rise - I need to go from 1 1/4 to 2” with 10” rise to carry electric wheelchair on my 2017 mustang. Car is low and 5” rise drags | There is a potential way for you...
Dual Hitch Receiver Compatible with Towing a Car Dolly
Are you able to use The thousand pound do it receiver with a car dolly? | The Roadmaster Dual Hitch Receiver Adapter, 8" Drop/Rise # RM-077-8 has a towing capacity of 10,000 lbs but the tongue weight is limited to 400 lbs. As long as the tongue...
Trailer Hitch that Fits 2021 Ford Mustang California Special
Hello, Would like to know which bike hitch will fit my 2021 California Special GT Mustang. Thank you! Eve | Hey Eve, we have the Curt hitch part # C11405 that does fit your 2021 Ford Mustang California Special. Are you also looking for a bike...
What Other Vehicles Will the Superchips Flashpaq F5 Performance Tuner SU2845 Work On
I sold my truck, is this thing useless now? | The Superchips Flashpaq F5 Performance Tuner part # SU2845 will work with many different vehicles which I have attached a list of for you below. That said, in order to transfer the device from one...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Mounting Hole Measurements for Derale 17" Fan Clutch Fan
What is the measurements from center of hole to hole? There are two options for mounting. What is each of the measurements for these two options? | Hey Darin, thanks for reaching out! The mounting holes for the Derale 17" Fan Clutch Fan #...
Dimensions of Draw-Tite Trailer Hitch Receiver # 76015
can you give me the inside horiz width from the bottom two holes on each side in inches ? e.g. 48.5 or 51etc also the vertical height from the top of the receiver bar to the bottom of the same two holes, thanks | The Draw-Tite Max-Frame Trailer...
Recommended Cargo Carrier For 2015 Ford Mustang With 1-1/4 Inch Trailer Hitch
Will this basket fits my 2015 Ford Mustang Convertible with the hitch specification attached? Thanks, | To be able to use the Curt Cargo Carrier, part # C18151 on your 2015 Mustang you will need an adapter because the only trailer hitches available...
Troubleshooting 2011 Ford Mustang Curt Wiring Without a Solid Ground
I have installed this and double checked my wiring connections, but every pin on the 4 pin connector is solid on except ground. I am thinking there is something wrong with the module itself. Please advise. Thanks | Hey John, thanks for reaching...
Can Tongue Weight of Curt # C11041 be Increased for Use on a 1999 Ford Mustang
Is thair any custom modifications i can do to the hitch to increase the tounge weight? | The weight capacities of trailer hitches, like the Curt # C11041 for your 1999 ford Mustang, cannot be enhanced. Trailer hitches are tested extensively...
Should There Be A Gap Between The Seal and The Inner Bearing In My Hub
I am replacing a set of bearings/races/grease seals on my trailer hubs. The bearing kits I bought BK1-150 come with 10-60 grease seals. When I was seating the seal I noticed that it was not touching the inner bearing when it was flush with the...
Recommended Trailer Hitch and 2-Bike Rack for a 2010 Ford Mustang
I’m interested in a hitch along with a 2 bike carrier for my 2010 Ford Mustang. Could you give me some product recommendations? Also, would the hitch install be something that a local auto repair shop could do easily? I would not be able to...
Parts Needed to Flat Tow 1998 Ford Mustang 5-Speed
Can a 1998 mustang 5 speed be flat towed behind a motor home without any modification | I did some checking and your 1998 Ford Mustang with a manual transmission is flat towable as-is without any modifications. We have the parts you'd need to...
Race Ramps Needed For A 2024 Ford Mustang
2024 Mustang Ecoboost Premium 4 cyl 255/40 R19 Tires Will theses ramps work or any others you carry | Hey Thomas, You'll need to take a measurement called the "Yardstick Test". If your height is less than 6.75" then you won't be able to...
Troubleshooting Trailer Wiring When Connecting a 4 Flat Vehicle Side to 4 Flat-5 Wire Trailer
I have a 2001 Isuzu Rodeo and was recently trying to connect the connector wires to my trailer. My Rodeo is setup to use a 4 flat female end that runs to 4 wires Ground, Tail, L Turn, R Turn to a converter that connects the 4 wires of the end...
Trailer Hitch Receiver and Bike Rack Recommendation for 2014 Ford Mustang Coupe
I need to carry 2-4 bikes by the wheels carbon, not bar. I have a 2014 Mustang coupe v6 and am looking for the best set up. | When it comes to a trailer hitch receiver for your 2014 Ford Mustang, I recommend the Draw-Tite Class I Sportframe,...
Replacement Light Board for etrailer Electric Jack # EJ-3520-BBX
can I fix the led light my fic trailer jackralph | Hey Ralph, if you have the etrailer jack part # EJ-3520-BBX that you referenced the correct replacement light board to fix the light would be the part # EJ-3520-LT. |
Trailer Hitch Receiver For 2010 Ford Mustang For Rack
I have 1 dirtbike and it’s about 215lbs and the rack for it is 60lbs.what would be your recommendation if I’m not wanting a trailer? | Hey Izzy, So there is only one hitch for your 2010 Ford Mustang, which means there isn't any type of alternate...
Do you Have a Battery Holder for 24F Battery in 1965 Mustang 289
I have a 1965 Mustang 289. I am having trouble getting a decent battery for it. The new 24F series do not allow for the original hold down at the base of the battery since there is no foot/protrusion/extending base at the bottom of the battery....
How to Mount a Snow Board Carrier on a Mustang
Seeing as the mustang never had roof mount points, i am investigating a hitch and snowboard mount. If it is even possible... the class 1 should be plenty for 2-3 boards and the thule mount. Is this idea even possible, given how low a car/hitch...
Filter Your Search
Contact and Help