Dimensions of Draw-Tite Trailer Hitch Receiver # 76015

Updated 07/27/2020 | Published 12/23/2017

Question:

can you give me the inside horiz width from the bottom two holes on each side in inches ? e.g. 48.5 or 51etc also the vertical height from the top of the receiver bar to the bottom of the same two holes, thanks

asked by: Tommy

Helpful Expert Reply:

The Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2" # 76015 has a width in between the upright braces of 44-1/4 inches. The lower holes are 4-1/2 inches on center and 6 inches from the top of the crossbar to the bottom of the hole. The plate on top of the bar will subtract 1/4 inch from that measurement. I've attached a photo to assist.

expert reply by: Jason S

click to enlarge

Danny J.

7/22/2020

What is the ground clearance when installed on a 2016 Metris? I know it's 10" on the Curt hitch for the Metris, but one reviewer of the Draw-Tite mentioned he only had 7 inches. Thanks

Chris R.

7/27/2020

We haven't had a chance to actually install the Draw-Tite # 76015, so I can't provide an exact ground clearance measurement. It has a really similar design to the Curt alternative, so I have to imagine it's close to the 10" measurement we took with that hitch mounted. Keep in mind too that not all ground clearance measurements will be the same, as suspension age, weight in the trunk, etc will all affect this dimension.