Replacement Hub, Drum and Brake Assemblies for AL KO 3,500 lb Axle
I have a 2008 Flagstaff camper with two Alko axles. It is in need of new brakes/drums. Ive attached a photo of the plate attached to the front axle. Could you reference me to the proper parts, drums and brakes, including seals and dust caps...
Recommended Replacement Hydraulic Pump Motor for a Lippert Leveling System
is the 172911 the replacement for 414850 on a Lippert leveling systems? | Tan, it actually looks like the Replacement Hydraulic Pump Motor for Lippert RV Leveling Systems # LC57AF is the correct replacement for your Lippert 414850. To get...
Troubleshooting Curt Trutrac System Digging Into Brackets
I recently purchased the Curt Trutrac WD C17501 for my 2004 Ford Excursion towing a 39ft travel trailer. The tongue weight loaded is around 1100 lb. The RV dealership installed the weight distribution on my trailer and set it up but after driving...
Replacement Hardware for 2016 Mazda 6 Trailer Hitch
Do yall have the hardware kit to bolt up a trailer hitch I already have do yall have the hardware kit for it on a 2016 Mazda 6 | Hey Carl! We do have replacement hardware under the Replacement Hardware Kit for Trailer Hitches # RHK. However,...
Looking for Replacement Locking End Caps for Rhino Rack Aero Roof Rack
hi- i am wondering if rhino rack locking end cap part m622 is available to purchase and what size security key is used to operate. thank you in advance for your time. chris baer | Hey Christopher, it sounds like you are looking for a replacement...
Recommended Air Bags for a 2005 Ford Econoline 350 w/ a V10
I have a 2005 Ford Econoline 350 with V10. It has a 3 inch lift. Do you have any rear air suspension products that would work with the lift. I want to tow with it and I am a huge fan of of the rear suspension airbag systems. | Hey Russell, we...
Air Bag and Auto Leveling Compressor kit for 2003 Ford Excursion
Hi. I would like to install air bags on my Excurion 2003 4wd diesel. I would like it to auto level and not have to mess with bicycle pumps etc. Is there a kit for that? Thanks | Hey Pete, we have just what you are looking for with the Firestone...
Will a 4.80-8 Trailer Tire Fit in Place of a 4.00-8 Tire
I have seed planter with implement tires of 4.00 x 8. Will a 4.80 tire fit? | Yes, a 4.80-8 tire will fit in place of a 4.00-8 tire. That is why a lot of times you will see both sizes in the product's title or description and even on the actual...
Tools Required for Install of Trailer Hitch on 2017 Mazda 6
Hi, I am interested in installing trailer hitch for my Mazda 6 2017. What tools are required? Do you have any local installation experts or stores? Thanks, | For a trailer hitch for your 2017 Mazda 6 the Curt Hitch # C11356 is a confirmed fit...
What is Max Amperage Draw of Bulldog Winch Light Duty On-Board Air Compressor
What is the maximum amp draw of this compressor? | Hey Michael, the Bulldog Winch Light Duty On-Board Air Compressor # BDW46TJ draws at max just under 40 amps. |
What Rack System Can I Use On My 2002 Ford Excursion With Factory Side Tracks
Will this fit the factory tracks of a 2002 ford excursion? | Great question, Dave! After some double checking I can confirm that Rhino Rack part # Y02-480B-NT will work on the factory tracks on the roof of your 2002 Ford Excursion. What are...
Which Kat's Block Heater Fits 2025 Mitsubishi Outlander SE 2.5 Liter
Will this heater work, without modification, on my 2025 Mitsubishi Outlander SE? Please confirm the location for this vehicle as well. | Hey James, yes the Kat's Heater part # KH11812 that you referenced is a confirmed fit for your 2025 Mitsubishi...
Replacement Keys For Rhino Rack
I purchased a Rhino roof rack system 2003 Ford Excursion from you 3 or so years ago. Im in need of replacement keys, the lock number is 012 and the rack end cap is code M622 original keyinch was a blue plastic round key. Can I get those from...
Looking For A Shocker Hitch For My 2003 Ford Excursion Pulling A 7k Trailer
I am interested in a shocker hitch. I have a 2003 ford excursion, 7.3 l diesel with 4 wheel drive. I primarily pull a RV that weighs 7,000 lbs. What model do you recommend? thanks | Hey Patrick, The Shocker Hitch # SHK47VR would be a solid...
Looking For Replacement Weather Stripping For Lift Gate On 2003 Ford Excursion
I need to replace the weather stripping for the lift gate on my 2003 Ford Excursion and the OEM Part 2C7Z-78404A06-AA has been discontinued. I have been searching junk yards and the internet for something that might work. Might you have something...
Troubleshooting Open Ground Warning on P3 with Known Solid Ground Connection
I have the Prodigy P3 installed on my 2003 Excursion 6.0L diesel using the 3035-P adapter. Intermittently I get the Open Ground No Brakes warning message. No trailer connected. I checked the batteries negative terminal to chassis in the engine...
Does Firestone Ride Rite Kit for 2001 Ford Excursion Require Install of Compressor
Hi, Im thinking about purchasing a Firestone Ride-Rite: 2255 - Rear Kit for a 2001 Ford excursion. I tow a travel trailer with it. Would I need to pair that up with the Firestone Level Command Air Compressor System Single Gauge? | The Firestone...
Does Bigger Trailer Mean Faster Speed
Is there a 12inch trailer tire that can run at 70 MPH? | Trailer tires are only rated to go 65 miles per hour unless indicated. Trailer tires are built with a thicker sidewall, to handle vertical loads, that get hot enough to fail when you exceed...
Do You Have a Class V Hitch for My 2003 Ford Excursion?
I am looking to replace my trailer hitch on 2003 Ford Excursion and wanted to see if you had a class V option? Not that I want to tow that heavy but for the thickness it looks like they have in the metal. Is there any that would match frame...
Why Choose a Powered Taillight Converter Over a Non-Powered Model
What dictates the need between using a powered Tail light convertor Vs a non powered? | There's a couple of factors that determine that. On older vehicles, very few vehicles needed a powered converter, because the vehicle's electrical system...
Recommended Factory Replacement Hitch for a 2000 Ford Excursion
2000 Ford Excursion with towing package. The current Ford hitch has an electrical connection in a steel frame to the left of the hitch. I don't see that on the CURT 14011 Class 4 Trailer Hitch. Do I have to remove the current electrical connection...
Will Blue Ox SwayPro WDH Fit V Nose Trailer
Good afternoon, I have a 8x20 V nose enclosed car hauler trailer with not much room on the tongue. Usually when it’s loaded the tongue weight is around 1,200-1,300 pounds. I’ve been pulling it okay since my old tow vehicle had air bags but...
How Does the Reese Friction Sway Control Kit Attach to the Hitch?
SWAY BARS: Regarding the hitch mounted ball for the sway bar, is the frame that the ball is mounted to an welded integral part of the trailer hitch or is this frame mounted under the main 2 ball? | Hey Larry! The Reese Friction Sway Control...
What Axle Spacing Can Be Used With The Tandem Axle Fenders HP92VR?
What is the axle to axle distance? | Hi Dawin! With the etrailer Tandem Axle Teardrop Fenders w/ Backing Plates - 15" to 16" Wheels - Qty 2 # HP92VR measuring 72" long, the mid point would be 36", which therein means 18" of space from the absolute...
Filter Your Search
Contact and Help