Recommended Replacement Hydraulic Pump Motor for a Lippert Leveling System

Updated 05/04/2026 | Published 09/01/2024

Question:

is the 172911 the replacement for 414850 on a Lippert leveling systems?

asked by: Tan K

Expert Reply:

Tan, it actually looks like the Replacement Hydraulic Pump Motor for Lippert RV Leveling Systems # LC57AF is the correct replacement for your Lippert 414850.

To get this part though, you'd need to call into our customer service team and place your order through there.

expert reply by: Bryce D

Jesse M.

1/12/2026

Hey Tan, were you able to get the correct hydraulic pump motor for your Lippert leveling system after calling in? Knowing what worked could help someone else trying to replace the same part.

Hei P.

5/4/2026

@JesseM min pompe tar ikke oil får ikke den til å ta oil

Jesse M.

5/4/2026

@HeiP Hvis Lippert-pumpen ikke trekker olje, er det som regel et primingsproblem eller luft som kommer inn på sugesiden. Sørg for at tanken er fylt riktig med støttebeina trukket inn og at lokket er ventilert, og sjekk sugeslangen og koblingene for luftlekkasjer, selv små lekkasjer kan hindre den i å trekke væske. Du kan prøve å kjøre systemet noen ganger eller løsne en kobling litt for å slippe ut luft mens du gir pumpen et kort støt for å hjelpe den med å prime. Hvis alt er tett og den fortsatt ikke trekker, kan det være et problem med selve pumpen. If that Lippert pump isn’t taking oil, it’s almost always a priming issue or air getting into the suction side. Make sure the reservoir is full with the jacks retracted and the cap is vented, then check the suction hose and fittings for any air leaks, even a small one will stop it from pulling fluid. You can try cycling the system a few times or lightly cracking a fitting to let air escape while bumping the pump to help it prime. If everything is sealed and it still won’t pull, then you’re likely looking at a pump issue.