Which Brophy Tie Downs Will Fit a 2002 Dodge Dakota?
I have a dodge dakota 2002 with a 5 foot 3 bed. Wondering what model of brophy tie down i need. I cant get to my truck to measure, thanks in advance : | When we are unable to measure we recommend going with the larger Brophy Tie Down # HSSF...
Dimensions Of The Brophy Rope D-Ring Tie-Down Anchor # BR59FR
What are the dimensions of this tie down? Both the exterior and actual d ring. | Hey Greg, I've drawn up a diagram of the dimensions for the Brophy Rope D-Ring Tie-Down Anchor # BR59FR and attached it below. If you have any other questions...
What Hitch Fits My Non-AWD 2022 Volkswagen Taos?
My 2022 Taos is not a AWD version. Can I still put on a hitch for my bike rack? | Definitely! We have a great hitch that fits a non-AWD 2022 Volkswagen Taos. For that recommendation, I suggest the Curt Trailer Hitch Receiver - Custom Fit - Class...
Availability Of Adapter To Go From 1-1/4" Hitch To A 2" Hitch
I have a Nissan Altima 2016 with a class I hitch 1 1/4in. Can you recommend an adapter that will allow me to attach a cargo carrier that uses a 2in hitch? | We do have an adapter that will allow you to attach a 2" cargo carrier to the 1-1/4"...
Recommended Hitch Extension For A 3 Hitch On A 2021 Ford F-250
I have a 2021 F-250 with a 3inch receiver. I need to have a extension for use when I have tailgate down and camper installed. I only need to extend the hitch out about 17-20. I tow a vehicle trailer with a side-by-side and a pontoon boat trailer....
Bolt Hole and Bracket Spacing for the etrailer Sleeve-Lock Trailer Coupler
What is the hole spacing and the width inside the channel? Specifically would this also fit properly in the channel CTA-196 | Yes, the Sleeve-Lock Trailer Coupler # CTA-196 will fit the channel bracket that comes with the Brophy Lunette Ring...
Tie-Down Recommendation for Bulldog Winch Ratcheting Wheel Tie-Down Strap
I would like to use this for tying down my garden pulling tractors. These are not made to hook in e track correct? The tractor with fat tires | The Bulldog Winch Ratcheting Wheel Tie-Down Strap # BDW20362 is designed to connect to a D-Ring type...
Recommended Hitch and Hitch Expander for a 2018 Honda Civic Sedan
I’m looking for a 2 inch hitch for a 2018 Honda Civic sedan. Not looking to tow anything, but I have a bike rack and hitch carrier that both use a 2 inch receiver. | Hey Robert, it looks like all of the hitches we have for a 2018 Honda Civic...
How Much Fender Clearance Does The Brophy Heavy Duty Cable Camper Jacks Offer
Why can I not find a picture with these brophy jack being used on a truck camper? I have articfox on F450 can I get passed my back tire fenders? | We don't currently have any customer submitted photos for the Brophy Heavy Duty Cable Camper...
Solution for Hitch Extension With 1,000 Pound TW and 10,000 Pound GTW Capacity on 2000 F-350
Hi, I need a class 4, 14-16” hitch extension that goes to a 2x2 receiver . It has a 2 5/16 ball. Vehicle is a 2000 f350 dually and the trailer is a 20’ 9990gvw enclosed trailer. By my calculations, the extension has to be rated for 10000 lb...
Comparing The Brophy # AS24 And Torklift # TLA7844 For Truck Bed Camper With Limited Mounting Space
Hello, Im looking for a 4 step **removable** scissor step solution for my truck camper. I really like the Torklift Landing Gears on the Torklift steps Im looking at, but it isnt really designed to be removable like the Brophy model. I watched...
Spare Tire Carrier For a RV Motorhome With 4" Bumper Capable Of Carrying a Dually Style Wheel & Tire
Do you have a Spare tire carrier that would attach to a 4 RV bumper to carry a spare tire for a dual wheel offset rim measuring 16 x 6.5 inch? you sell a similar rim: TA56FR | The Brophy Rigid Mount Spare Tire Carrier # BR56VR will allow you...
Which Backing Plate Is Used with the etrailer D-Ring Tie Down Anchor RRING-Q6000?
What backing plate part # would I order to go along with this recessed d ring? | For the etrailer D-Ring Tie Down Anchor # RRING-Q6000 you will need to use the Backing Plate # BP05. This will increase surface area for the bolts used to attach...
Recommended D-Ring Tie-Down Anchor For With An Endless Loop
I have the same size D-ring floor anchors in my toy hauler. They are stamped 2500 LBS. Problem with them is that the D-ring is not endless and anytime I have to anchor a load from the side slightly off center the D pulls apart at the break...
Recommended Hitch Extender for a Bike Rack
We need to extend the hitch receiver of about 4 inches, I found the folllowing item Code: RKY10011. As the tongue weight is about 1500 lbs, am I right to assume my new max tong weight is about 700 lbs half 1500 lbs and some safety We will be...
Recommended Hitch for a 2023 Mazda CX-9
hello I am looking for a class 3 and harness for lights for a2023 mazda cx9. I only see class 3 for 2022 when I choose 2023 it says it does not fit this vehicle. any help thank you | To add a class III hitch to your 2023 Mazda CX-9 you will...
What is the Overall Length of the Kuat Hitch Receiver Reducer Sleeve # KU93VR?
The video review show the sleeve at 6.25 inches long but descriptions all say 8” long. So how long is it actually? Is there is an 8” and a 6.25 sleeve and if there is two different lengths, which would I get for my 2019 f 350 2.5” receiver?...
Options to Reduce a Trailer Hitch From 2" to 1-1/4" to Use an Older Swagman Bike Rack
I have an older Swagman rack and recently bought a Class III hitch. The 1-1/4-inch shank on the Swagman only has one pin hole, so I cant use the Swagman adapter. Would this product work? | The RockyMounts 1-1/4" to 2" Hitch Adapter Sleeve for...
Camper Tie Downs For a 2021 Ford F-350
First thing what is the weight capacity for these clamps and also that that have to be specific for your track I have a 20-21 Ford F-350 Super Duty | The Brophy Clamp On Camper Tie-Downs # HSWB do not have a weight rating since they do not support...
Best Hitch Curt or Draw-Tite for a 2023 Hyundai Santa Cruz
What is the difference between the Draw-Tite and Curt Hitches for a 2023 Santa Cruz? Which one do you recommend for my truck or is there a better option? | The Curt Trailer Hitch item # C23WR and the Draw-Tite Hitch item # DT48GR are almost...
Can A Class III Ball Mount Be Used On a Class II Hitch
Will this accept the Reese measured from outside edge to edge of the square tube 2 ball mount? | If you're asking whether or not a 2" Reese ball mount can be used with the Curt Trailer Hitch Receiver # C12115, then the answer is no because this...
Will Draw-Tite Hitch For 2017 Ford Fusion Work With 2 Inch Hitch Adapter For Bike Rack
Hi, I drive a 2017 Ford Fusion SE. Would I be able to use part #24897 with a 2 inch hitch adapter to make it fit my 2 inch bike rack? I saw a note on one of the images that the hitch receiver won't work with Class 2 accessories so I am unsure...
Is Aluminum Ball Mount Compatible With Stainless Steel Hitch Ball For 2 Inch Hitch
Im looking into getting an aluminum hitch ball mount to avoid storing a rusty ball mount in my Highlander, as well as for the light weight. Ill only be using it for a 2-place snowmobile trailer I have. I was also thinking about getting a stainless...
Will the Hollywood Racks RV Rider Clear My Spare Tire on My Jeep Wrangler?
So this is the you stock # for the hr1700. Is the product marked Hollywood HR1700.? It does clear the spare tire on a jeep wrangler as indicated in picture. Return is free if wrong? Have bought from you guys before for my flat tow equipment...
Filter Your Search
Contact and Help