Recommended D-Ring Tie-Down Anchor For With An Endless Loop
Updated 07/08/2023 | Published 07/05/2023
Products Featured in This Question
Question:
I have the same size D-ring floor anchors in my toy hauler. They are stamped 2500 LBS. Problem with them is that the D-ring is not endless and anytime I have to anchor a load from the side slightly off center the D pulls apart at the break using just minimal pressure. See photos attached. Do you offer a similar anchor that has a solid endless D-ring that I could replace these with? A lower pound rating would be fine. Thanks.
asked by: Donald P
Expert Reply:
For a tie down D-Ring that doesn't have a weld to fail like your current tie-down you'd have to transition to a different design like the etrailer D-Ring Tie Down Anchor # RRING-Q6000. The options we have with the same design that you currently have unfortunately don't come with an endless loop so you'd have to switch to a different design. It has a maximum load (break strength) of 6,000lbs and safe working load limit (WLL) of 2,000lbs. I've attached a diagram of its dimensions below as well as a short video where Jake will walk you through the installation process.
(click to enlarge)
(click to enlarge)
Product Page this Question was Asked From
Brophy D-Ring Tie Down Anchor - Bolt-On - 3-9/16" Wide - Recessed Mount - 400 lbs
- Trailer Tie Down Anchors
- D-Rings
- Universal
- Zinc-Plated Steel
- 400 lbs
- Bolt-On
- Folding
- Recessed Mount
- Brophy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: What Size Cut Out to Install etrailer D-ring part # RRING-Q6000
- Search Results: tie down anchors
- Shop: etrailer D-Ring Tie Down Anchor - Bolt On - 4-7/8" Wide - Square Mounting Holes - 2,000 lbs
- Search Results: e track
- Search Results: recessed d~ring
- Shop: Brophy Swiveling D-Ring Anchors w Backing Plates and Hardware - Bolt-On - 2,000 lbs - Qty 4
- Search Results: spare tire mount
- Search Results: folding tongue
- Search Results: x~track
- Search Results: folding tongue kit
- Shop: Backing Plate for Brophy Recessed D-Ring Tie-Down Anchor
- Shop: Brophy D-Ring Tie Down Anchor w Backing Plate - Bolt-On - 1/2" Wide - Recessed - 1,600 lbs
- Shop: Loadstar ST205/75D15 Trailer Tire with Black Mod Wheel - 5 on 4-1/2
- Video: Trailer Spare Tire Mount by Dutton-Lainson Review
- Shop: BOLT brand vehicle and hitch locks
- Shop: Erickson Round D-Ring Tie-Down Anchor - Surface Mount - 1,200 lbs
- Video: Detailed Breakdown of the Erickson Round D-Ring Tie-Down Anchor
- Shop: CargoSmart Recessed D-Ring Tie-Down Anchor - Bolt On - 3/8" x 2-1/8" - 1,667 lbs
- Q&A: Can E-Track Installed as a Flush Mount
- Shop: Brake Controller
- Shop: Trailer Wiring
- Video: Comprehensive Review: Stake Pocket Tie-Down Anchor
- Video: Complete Breakdown of the etrailer E Track O-Ring Tie-Down Anchor
- Video: Brophy D-Ring Tie Down Anchor w Backing Plate: The Breakdown
- Video: Review of the etrailer D-Ring Tie Down Anchor
- Video: Comprehensive Review: etrailer E Track Heavy-Duty O-Ring Tie-Down Anchor
- Article: How to Adjust Your Trailer Brakes | The Ultimate Guide
- Article: Testing Trailer Brake Magnets for Proper Function
- Q&A: Parts Needed to Tow Trailer with Brakes on 2020 Honda Pilot
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
on Trailer Tie Down Anchors
