2018 Jayco Pinnacle Fifth Wheel RV Camera

Hey, Joe. That's a great question. Backup cameras and rearview, observation, cameras are essentially the same, the difference comes down to how they’re wired. With a system like the Furrion Vision S+ Wireless RV Backup System #FR57AD, it’s…

*Updated From Below Hi Michael; I'm sure you're right, it is probably prepped for the Furrion. Since Furrion is phasing out the old Vision S, and parts won't be available soon, you want to get the new Furrion Vision S+ Wireless RV Backup…

Hey Mike, your 2025 Chevy Silverado 2500HD will have the power issue with the Furrion Vision S + #FR57AD that you have so you would need a solution like the part #VGR64VR that you referenced. Or if you don't want to mess with any wiring you could…

Hey Bill, yes the Furrion Vision S+ #FR64AD would be a direct replacement for your current Vision S system. None of it is backwards compatible with the standard Vision S system though.

Hey Michael. The backup camera that comes with the Furrion Vision S+ System item #FR57AD has built in mounting holes in the casing. It comes with four #6 x 3/4" flat head self-tapping screws, four #4 x 1/4" self-tapping screws, sealant, and…

Hey Robert, I would check to see if something happened to the antenna on the camera if this is a new problem. It's possible it's not pointing up anymore and fixing that will get you back the reception you once had. Let me know if that helps…

Hey John! The Furrion Vision S+ #FR57AD does act as sort of a rear view mirror when you're towing or if you have an in bed camper, but it is not designed to replace the mirror on your vehicle. The camera stays on while you’re driving so you can…

Hey Liz. The cameras of the Furrion Vision S+ item #FR64AD will need to be wired directly to a constant 12v power source, like your Grand Design's batteries, to use them in the security mode. With the infrared lights on each camera will pull less…

Hey Thomas, for just a single rear camera Furrion Vision S+ kit you'd want the part #FR57AD. Are you wanting an additional rear camera to use with this or the one with the red light built into it by chance? We don't have either of those right…

Hey Mary! The 12V PWM Filter #VGR64VR will work with the Furrion camera and prevent any issues with the PWM from your 2020 Sierra. However, I do recommend getting the Furrion Vision S+ #FR57AD over the old Vision S. They use the same mount so this is…

Hello Herb, thanks for reaching out. The Furrion Vision S+ Wireless RV Observation System #FR64AD does have a motion detector on the rear camera. You can insert a micro SD memory card in the monitor which allows it to record footage at night. You can…

Hey Mike, it is important that you use the included power cable with the Furrion Vision S+ Wireless RV Backup System w/ 1 Camera #FR57AD like the instructions indicate. If this is like a hardwire install I would look for a cigarette lighter to 2-wire…