2003 Fleetwood Wilderness GL Fifth Wheel RV Camera

Since your trailer has the bracket #FRCBRKT-BL that would mean your trailer has the Furrion pre-wiring which is very common for newer RVs. The part #FOS43TASF is a fit for this and would be a really easy install. This gives you a monitor with a 4.3…

Hey Luke! What kind of trailer do you have? Yes, the Furrion Vision S+ Wireless RV Backup System #FR57AD will fit where the old Vision S was. They use the same mounting bracket and wiring so it should be an easy swap. The only thing that isn't…

Hey John! Do you know what your 2025 NoBo 19.2 is prepped for? If it is Voyager you can use the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RVs #ASA37YR. If it is Furrion you need the new Furrion Vision S+ Wireless…

Hey James, you can go with a 4k axle leaf spring like the part #e22YR in place of what you have now while it has a slightly higher weight capacity it's not enough that it would create a harsh ride quality. This is a 26 inch long spring though so…

Hey Dennis, thanks for reaching out! The Furrion Vision S+ system is what you're looking for as the rear camera will be plug and play like you're wanting. For a single rear camera, you need the Kit #FR57AD, but if you'd like to install a…

The Voyager WiSight Wireless RV Backup Camera System #ASA37YR you were looking at is only compatible with the RV Backup Camera #ASA74YRor #WVH100 so this would need to be the camera you already have installed or you would need to replace the camera.…

Hey Alfredo! Great question. The Furrion Vision S+ Wireless RV Observation System #FR57AD, #FR74AD, and #FR64AD are all capable of recording. The 7" monitor has a micro-SD card slot (must be at least Class 10) and supports cards up to 128GB.…

Since your trailer is not pre-wired to accept a backup camera, the Voyager WiSight 2.0 Wireless Backup Camera System w/ Night Vision for Prewired RV #ASA37YR will not work for you. Instead, you're going to want to take a look at the Voyager…

Hey Tom! The MORryde Cushioned 5th Wheel Pin Box is an awesome system and will greatly improve your towing experience. Based on the sticker you have a Lippert 1621 pin box. Also, thank you for providing the GVWR of your 2018 Heartland Pioneer PI287…

The Voyager monitor part #VOM719WP will work great as a replacement monitor for what you have now with the AOM-7694.

Thanks so much for the photo, it was super helpful, and what it shows is that your trailer has the Voyager WiSight Pre-Wire Plate. This will allow you to mount the Voyager WiSight camera system: - Voyager WiSight Wireless RV Backup Camera System…

The easiest way to install the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision #ASA84YR on your Airstream Basecamp trailer is to wire it to the running lights circuit, which will allow the camera to be on all the time as long as…