Can Voyager Wisight 2.0 Camera Replace Wisight of 2018 Airstream Bambi
Updated 07/27/2025 | Published 03/19/2025
Question:
We have a 2018 Airstream Bambi with a voyager rear camera see attached pictures. Will the ASA57YR replace it, and do I need anything to seal the base of the camera where it attaches to the Airstream? Do you have a video of how I detach the old one and install the new one? Finally, does the new monitor use/come with a 12 V electric line for power in our car? Thanks.
asked by: Bruce W
(click to enlarge)
(click to enlarge)
Expert Reply:
Hey Bruce, the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision # ASA57YR that you referenced does replace the Voyager setup you currently have installed in your 2018 Airstream Bambi. Sealing the base of the camera mount would probably be your best option but I would look to see how your current camera is sealed and use that method again.
We don't have an install video I can link but you'll want to use allen wrenches to detach the camera from the mount and then once that's out of the way you'd be able to unscrew the mount from your RV and then reverse the process to install the new camera.
Product Page this Question was Asked From
Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
- RV Camera System
- Backup Camera
- Built-In Microphone
- Mirrored Image
- Night Vision
- Waterproof
- Wireless
- Wide View
- Suction Cup Mount
- Rear
- 7 Inch Display
- 1 Camera
- Voyager
more information >
Continue Researching
- Search Results: rv camera system
- Video: Installing the Voyager WiSight 2.0 Wireless RV Backup Camera System on a 2018 Airstream Sport Travel
- Shop: Replacement Voyager WiSight 2.0 Wireless RV Backup Camera Monitor - 4.3" Screen
- Shop: RV Camera
- Shop: Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 7" Screen
- Q&A: Replacement Voyager WiSight Camera for a 2017 Airstream International
- Q&A: Recommended Backup Camera Upgrade for a 2023 Airstream Rangeline
- Shop: Tekonsha Prodigy P3 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Shop: Curt Heavy Duty Forged Ball Mount with 2-5/16" Ball - 2" Drop - 15,000 lbs
- Shop: Brake Controller
- Q&A: Replacement Monitor for a Voyager WVCMS130AP Camera
- Video: Let’s Check Out the Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision
- Shop: Replacement Voyager WiSight 2.0 Wireless RV Backup Camera with Low Light Assist
- Shop: Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision - Rear Mount - 4.3" Screen
- Video: Comprehensive Review: Voyager WiSight 2.0 Wireless RV Backup Camera System w/ Night Vision
- Shop: Replacement Voyager WiSight 2.0 Wireless RV Backup Camera w/ Night Vision for Prewired System
- Q&A: Option For Replacing Voyager WVOM541AP Monitor
- Q&A: Is There a Replacement For Voyager WVOM541AP
- Q&A: Upgrading From Original WiSight to WiSight 2.0 Camera System
- Search Results: voyager monitor
- Shop: Tool Box
- Video: Breaking Down the Antenna Extension for Voyager Digital Wireless System
- Q&A: Voyager WiSight 2.0 Camera System That Works With A Trailer That Is Not Pre-Wired
Charles
7/26/2025
Hi Jameson, I have the same camera system on my 2019 Airstream 23' trailer. If I buy the newer Voyager WiSight 2.0 system will I need to splice it to the wire where it emerges from the exterior skin of the Airtream. I plan to pull some slack, splice the new camera wire to the existing wire then tuck the splice back into the trailer then to reseal the exit hole. Does this sound like the right procedure? The existing original Voyager first generation camera has failed, looks like water got into it. Just looking for assurance before I order the $400 Voyager wisight 2.0 system.