Hey David, the Derale transmission cooler part #D15200 that you referenced does not come with a thermostat or any install kit components but if you wanted a similar option that does have all of that you would want the part #D15500.
The towing capacity of the 2003 Chevrolet Avalanche 1500 with 5.3L V8 and 4.10 rear axle is 8100-lbs. For a 7600-lb GVWR travel trailer the resulting 500-lb safety margin is adequate/low-ish. With a trailer that weighs substantially more than the tow…
Thanks for your question, Shannon! I reached out to SnowBear to confirm which blade would be the replacement part. They let me know that part #K2SB8200 is the correct part you would need. It comes as 3 pieces totaling to the 82" that your plow…
In regards to the Derale Thermal Fan Clutch with Reverse Rotation part #D22140, the distance from the mounting surface to the end of the shaft is 1-13/16" and the distance from the mounting surface to the end of the clutch is 1-3/4". I went…
Hey Steve. To replace the remote on your SnowBear Snowplow for 2" Hitches item #K2AVAL8219, you'll need the Replacement Wireless Remote Control for Detail K2 Snowplows item #K2WR100. The remote is programmed specific to the black solenoid…
Hey Scott, welcome back! Do you have a USCAR connection on there now with the old factory 7-way? It will look similar to the attached photo. If that is what you have, you can use the Curt Dual Connection Socket w/ Bracket - 7-Way RV Style and 4-Way…
Hey Mike, yes the replacement cap part #T097-022-00 that you referenced is the correct replacement cap for a Dexter Model A-60/A-75 brake actuator like it sounds like you have.
First you will need the Fan #FLX236 which will be controlled using the Flex-a-lite Adjustable Temperature Controller #FLX31149 on your 2005 GMC Envoy. You can also add the Auxiliary Switch #FLX31148 if you want to be able to turn on the fan manually.…
I have linked the installation instructions for Draw-Tite Class III hitch #75270 that fits your 2011 Honda Odyssey and the hardware torque specs, as well as a listing of the required tools, is included for your reference. Among other basic tools…
The choice of oil bath or regular hubs is up to the manufacturer. They are usually found on higher capacity axles, though as you know there are some on lower capacity axles. You can convert some hubs from grease to oil bath using a kit such as…
Hey Todd, thanks for reaching out, and for providing all of those pictures and dimensions. Sounds like you are going to get to hang on to your firstborn child though lol since we do not carry anything really even remotely close to the Glow-Brite M…
Filters
