How Long is the Cable in the Go Power Portable Solar Panel Kit

Question

Question:

I just bought this system. What is the length of the connection wire?

asked by: Ted

0

Expert Reply:

The length of the connection cable in the Go Power Portable Solar Panel with Digital Solar Controller # 34282730 is 12' long. We do have the Extension Cable for Go Power Portable Solar Kit # 34270356 available which is 30' long if you are needing more length.

expert reply by: Scott S

0

Answer 1

It looks like the WFCO 8935 is a 35 Amp converter, so you're not going to be able to install the Progressive Dynamics #PD9245C because it is rated for 45 amps. Adding a higher amp rating converter to your system could potentially cause…

view full answer...

Answer 2

It sounds like you are trying to add an after market solar prep package to your RV. We do not have the parts needed to accomplish that and the Go Power Portable Solar Panel with Digital Solar Controller #34282610 does not include the parts you would…

view full answer...

Answer 3

Since they didn't list the converter amperage rating on your panel you'll have to just choose the amperage your battery bank requires and then do a bit of investigative work to ensure that the wire gauge used for the converter is enough to…

view full answer...

Answer 4

To replace your Parallax 7445 converter you can use the Progressive Dynamics 9200 Inteli-Power Converter #PD9245C. This has the same amperage so you can just reuse the wiring running from the converter to the battery bank. The Parallax 7445 should…

view full answer...

Answer 5

Hello Victor, thanks for reaching out. The Progressive Dynamics 9300 Series RV Converter Charger #PD79RR will work great for replacing your WFCO WF-9855 converter. We recommend this model as a replacement quite frequently in fact, since it has the…

view full answer...

Answer 6

Hi Jeff, Nice choice with the 100 amp hour Go Power Lithium RV Battery #GP99QR as well as the Expansion Kit #34282182. Also, you can absolutely replace your PD9260 with the PD9360 model that is compatible with lithium batteries, and our part number…

view full answer...

Answer 7

Hey Mike, I would recommend going with a size larger with the Progressive Dynamics part #PD89RR as having more amperage than needed is better than not enough. If you went down in amperage your charging system wouldn't be able to keep up as well…

view full answer...

Answer 8

Lance does have a proprietary plug, but many customers see a standard 6-way or 7-way round and notice it doesn't fit their factory 7-way as well. I've attached an article to help if you have one of the 7-way or 6-way round connectors which we…

view full answer...

Answer 9

Hey Alvin, you could replace the Progressive Dynamics Inteli-Power Converter part #PD9145A with the part #PD9245C. This is a 45 amp converter just like what you have now plus it has the charge wizard! That's basically a fancy way of saying it…

view full answer...

Answer 10

Yes, the Progressive Dynamics Inteli-Power RV Converter and Smart Battery Charger #PD9245C will make a great replacement for your Triad TU-740-2 Converter Charger.

view full answer...

Answer 11

Hello Joeseppi, Let's get you into the right camper tie-down. Just as long as your 2021 Ford F-350 does not have factory flip-out steps that are mounted under the bed you will want the TorkLift Tie Downs - Custom Frame Mount - Front and Rear…

view full answer...

Answer 12

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

How Long is the Cable in the Go Power Portable Solar Panel Kit

Products Referenced in This Question

Product Page this Question was Asked From

Featured Help Information

Instructions

Miscellaneous Media

Continue Researching