Recommended Truck Bed Camper Storage Cover for Palomino HS2910 Max

Question

Question:

I was wondering what Truck Camper Covers would fit my 2018 Palomino Backpack HS2910 Max Slide in Hardside Truck Camper. Thank you for your help!

asked by: Alan

1

Helpful Expert Reply:

I looked up your truck bed camper and got the dimensions of 20 feet long, 8 feet wide, and 9 feet tall. With those dimensions, the Adco SFS AquaShed Truck Camper Cover - 20-3/16' Long - Gray # 290-12263 is the best fit and my recommendation for you.

expert reply by: Jason S

1

Answer 1

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

view full answer...

Answer 2

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

view full answer...

Answer 3

Hi David; the good news is the EcoHitch Hidden Trailer Hitch Receiver #EH92KR does fit the hybrid model of the 2025 Kia Carnival. This has a concealed cross tube so you won't lose a lot of clearance and a bolt-on installation. If you're…

view full answer...

Answer 4

Yes, it will work. You'll just need to cut the Lance 6-pin connector out and rewire it into the etrailer Trailer Wiring 7-Way Upgrade Kit w/ Junction Box and RV Style Connector item #e99011. Here are the individual functions of that Lance 6-pin:…

view full answer...

Answer 5

Hey Bob, The TorkLift Cannon Hitch Extension #TLE1648 would be a good option if your F-350 has the factory 3" Ford receiver hitch and you're needing 48" of extension. You can measure to figure out the correct length needed, with or…

view full answer...

Answer 6

Hey Kyle, so I checked with Torklift and we actually have the numbers wrong on the 21 inch version. The #TL46CR is actually rated for 550 lb tongue weight and 5,500 lb total trailer weight.

view full answer...

Answer 7

Hey Jeff! Yes, the Camco UltraGuard Slide-In Camper Cover - 18' Long #CAM45770 is what you need for your 2024 Palomino HS-8801 truck bed camper.

view full answer...

Answer 8

From information available to me online, your 2021 Northern Lite 8-11 truck camper has an overall length of 195". For your northern climate, I suggest the Camco UltraGuard Slide-In Camper Cover, #CAM45770. This has an overall length of 216"…

view full answer...

Answer 9

The Camco UltraGuard Slide-In Camper Cover, #CAM45773, will fit a slide-in camper that measures up to 19 feet 6 inches long. In my research, I found the length of an Artic Fox 990 Slide-In Camper to be around 17 feet. The #CAM45773 may be too long…

view full answer...

Answer 10

For your 2007 Lance 845 truck bed camper the cover I recommend is the Adco SFS Aquashed part #290-12264 which fits campers from 16 foot to 17-3/4 feet. This will fit well and provides best protection. You'd easily be able to tighten the cover…

view full answer...

Answer 11

I have the perfect solution for your 2019 Ram 3500 for suspension enhancement. The Timbren kit part #TDR3500CA which is a custom fit for your truck gives you all the support you need without ever having to worry about air bag pressure or air leaks…

view full answer...

Answer 12

I am happy to help you figure out the cover that you need for the 2011 Palomino 1000 to withstand the harsh Michigan winter. I believe the Palomino 100 is a truck bed camper. I have attached a diagram that shows where to measure to get the correct…

view full answer...

Recommended Truck Bed Camper Storage Cover for Palomino HS2910 Max

Products Referenced in This Question

Product Page this Question was Asked From

Continue Researching